Dealing with a bottleneck for the i9 14900K in Tarkov escape scenarios
Dealing with a bottleneck for the i9 14900K in Tarkov escape scenarios
These types of games offer a wide range of options. Warframe faces comparable challenges with draw calls, causing frame rates to fluctuate between 150 and 600 fps, even in 4K ultra settings. It's interesting how much performance is affected.
before the system reset it functioned properly, now it seems okay but there appears to be an issue. you might need to adjust a specific setting. the performance numbers are much higher now—up to 99% at 8k, compared to 55-70% at 4k—and utilization is near 100%. currently it's only around 30% on 26%, which is unusual.
Ensure rebar is activated in BIOS first. Apply the same configurations for RAM and overclocking. In Windows settings, navigate to the graphics section. Turn off optimizations for windowed games at the advanced level. Disable both choices—one addresses low-end CPU limitations.
By the way, no one can view your reply since you didn't reference them. Use the second arrow under the comment to indicate you've responded, otherwise it won't be obvious who replied.
I attempted to turn on rebar but it doesn’t seem to help either. Disabling the graphics setting didn’t resolve the issue, and I’m still experiencing problems only when using DLSS in escape mode. At 98% of use, turning it on only gives me about 31%, and both scenarios yield roughly 110 FPS—no noticeable difference.
before the system reset it functioned properly, now it seems okay but there appears to be an issue with a setting. The performance numbers are much higher than before—now it's reaching 99% utilization at 8k while previously it was between 55% and 70% at 4k. The current usage is only around 30% on 26%, which is quite low.