F5F Stay Refreshed Hardware Desktop Dead Ram slot?

Dead Ram slot?

Dead Ram slot?

J
julian_PVP
Senior Member
465
09-07-2021, 02:02 PM
#1
I followed the standard procedure for installing RAM and placed it in the 2nd and 4th slots from the CPU. Yesterday it stopped displaying on the monitor, but the PC started up normally afterward. I moved it to the 1st and 3rd slots and it worked again. Is the issue with your motherboard’s RAM slot, or is there another problem? The system seems to handle brief signal drops occasionally, but it usually resolves quickly.
J
julian_PVP
09-07-2021, 02:02 PM #1

I followed the standard procedure for installing RAM and placed it in the 2nd and 4th slots from the CPU. Yesterday it stopped displaying on the monitor, but the PC started up normally afterward. I moved it to the 1st and 3rd slots and it worked again. Is the issue with your motherboard’s RAM slot, or is there another problem? The system seems to handle brief signal drops occasionally, but it usually resolves quickly.

I
ISY_0815
Senior Member
566
09-07-2021, 08:48 PM
#2
Run memtest86 and OCCT to verify system stability. This helps confirm there’s no RAM-related issues.
I
ISY_0815
09-07-2021, 08:48 PM #2

Run memtest86 and OCCT to verify system stability. This helps confirm there’s no RAM-related issues.

M
MrEvan88
Member
114
09-07-2021, 11:23 PM
#3
Running memtest86 for two hours is ongoing; I'll keep you updated on the outcomes. After it finishes, I'll attempt to repair the ddu and reinstall the igpu drivers. For OCCT, what kind of stress tests are you planning to run right now?
M
MrEvan88
09-07-2021, 11:23 PM #3

Running memtest86 for two hours is ongoing; I'll keep you updated on the outcomes. After it finishes, I'll attempt to repair the ddu and reinstall the igpu drivers. For OCCT, what kind of stress tests are you planning to run right now?

R
reily1
Member
226
09-09-2021, 01:02 PM
#4
I also suggest checking the RAM, just to be thorough.
R
reily1
09-09-2021, 01:02 PM #4

I also suggest checking the RAM, just to be thorough.

A
Azralax
Member
59
09-10-2021, 08:47 AM
#5
I successfully completed the test and there were no errors. The noise signal reappeared briefly before stabilizing. Please assist by trying to install the DDU GPU drivers and reinstalling them using the provided file.
A
Azralax
09-10-2021, 08:47 AM #5

I successfully completed the test and there were no errors. The noise signal reappeared briefly before stabilizing. Please assist by trying to install the DDU GPU drivers and reinstalling them using the provided file.

F
Freedom_Men
Member
211
09-10-2021, 11:07 AM
#6
Check the device drivers and attempt to reset the CMOS.
F
Freedom_Men
09-10-2021, 11:07 AM #6

Check the device drivers and attempt to reset the CMOS.

A
angelcake_11
Senior Member
540
09-12-2021, 07:22 AM
#7
I checked them and reinstalled the Intel drivers. Currently, my PC isn’t showing any signal. I’ll try updating again if it happens once more. Also, my RAM slots 2 and 4 seem to be malfunctioning if I install RAM there. There’s no display output at the moment.
A
angelcake_11
09-12-2021, 07:22 AM #7

I checked them and reinstalled the Intel drivers. Currently, my PC isn’t showing any signal. I’ll try updating again if it happens once more. Also, my RAM slots 2 and 4 seem to be malfunctioning if I install RAM there. There’s no display output at the moment.

T
Tijeyd
Member
189
09-24-2021, 02:33 PM
#8
It seems the update isn't posted in slots 2 and 4. Consider refreshing the dimmer settings and updating the BIOS.
T
Tijeyd
09-24-2021, 02:33 PM #8

It seems the update isn't posted in slots 2 and 4. Consider refreshing the dimmer settings and updating the BIOS.