DDR4 Settings with Asus z10Pe
DDR4 Settings with Asus z10Pe
Hi,
I'm experiencing stability issues with my new build. I can't run Prime95 for more than a minute before it crashes. I'm considering overclocking the RAM settings but don't know how to proceed or where to start. I increased the DRAm Voltage in BIOS, but when I check on CPUZ on Windows, the voltage stays at 1.2v. Any advice would be greatly appreciated.
Mobo : ASUS z10PE D8 WS
CPU : 2x Intel XEON e5-2699 v4 ES QHUP 2.1ghtz
COOLER : 2x CORSAIR HYDRO SERIES, H60
RAM : CRUCIAL DDR4 32GB (2*16) ECC REG CT2K16G4RFD824A
PSU : CORSAIR RMX SERIES 850W RM850X 80+ GOLD
Overclocking RAM is inefficient when compared to utilizing all three memory channels for each CPU. Allocating only a quarter of the total memory bandwidth per CPU is suboptimal.
Overclocking RAM seems unnecessary compared to using the other three memory channels on each CPU. You're only utilizing a quarter of the available memory bandwidth.
It IS possible that you have defective hardware. That RAM is on the QVL for that motherboard. You shouldn't have to go to any extreme measures.
It IS possible that your system has faulty hardware. The RAM might be on the QVL for that motherboard. You shouldn't need to take extreme steps.
Thanks for the advice.
I’m not sure how to identify which hardware is causing this issue.
Sometimes it’s a machine check exception or a clock watchdog timeout, but I don’t have more information.
I’ve tried several solutions found online, but I still can’t find a fix.