ddr3Ddr3 1600mhz 4gb ram configuration

MisterT06
Junior Member

11-24-2017, 02:18 AM

I attempted to adjust my 1600 MHz to 3200 MHz, but I’m unsure what was happening in my mind. My display isn’t working anymore.

MisterT06

11-24-2017, 02:18 AM #1

I attempted to adjust my 1600 MHz to 3200 MHz, but I’m unsure what was happening in my mind. My display isn’t working anymore.

MlgTeletubbie
Junior Member

11-24-2017, 06:14 AM

Obtain your motherboard guide, locate the Clear CMOS switch (possibly marked CLRTC), modify it slightly (a screwdriver suffices as long as it stays on the correct pins), then activate your power switch. Your BIOS will be reinitialized and won’t attempt to run RAM at 3200 MT/s anymore.

MlgTeletubbie

11-24-2017, 06:14 AM #2

Commando__
Senior Member

744

11-24-2017, 10:13 AM

The motherboard you're looking for is an F2A55-M LK2 Plus model.

Commando__

11-24-2017, 10:13 AM #3

The motherboard you're looking for is an F2A55-M LK2 Plus model.

sosobub123
Member

11-25-2017, 03:03 PM

Discovered it now.

sosobub123

11-25-2017, 03:03 PM #4

Discovered it now.

pinkSparkle17
Member

192

11-25-2017, 04:26 PM

Yes, your PSU should be powered on to ensure proper operation and stability of your system.

pinkSparkle17

11-25-2017, 04:26 PM #5

Yes, your PSU should be powered on to ensure proper operation and stability of your system.

Omarhh
Member

217

11-25-2017, 05:03 PM

Ensure the PSU is active, use a metal tool to short the jumper, keep the power button pressed for ten seconds, then let it go. Take out the screwdriver from the pins and restart the system.

Omarhh

11-25-2017, 05:03 PM #6

Ensure the PSU is active, use a metal tool to short the jumper, keep the power button pressed for ten seconds, then let it go. Take out the screwdriver from the pins and restart the system.

Ardenty
Junior Member

12-04-2017, 02:42 AM

You're not receiving a signal on your monitor.

Ardenty

12-04-2017, 02:42 AM #7

You're not receiving a signal on your monitor.

GingaJamm
Member

12-24-2017, 08:51 PM

Do you own a specific graphics card? Is the connection for your display made to that card or directly to your motherboard? Is your power source active? Are there any indicators of lights or sounds coming from the setup?

GingaJamm

12-24-2017, 08:51 PM #8

V_Angel29
Member

187

12-25-2017, 01:25 PM

My PSU is good, my DVI cable is connected to the GPU, and three fans are running (GPU, CPU, PSU).

V_Angel29

12-25-2017, 01:25 PM #9

My PSU is good, my DVI cable is connected to the GPU, and three fans are running (GPU, CPU, PSU).