F5F Stay Refreshed Hardware Desktop Current temperatures are elevated.

Current temperatures are elevated.

Current temperatures are elevated.

A
AzoTax
Member
209
01-27-2022, 11:55 PM
#1
I'm running an AMD 5800x3d with a NZXT Kraken X53 cooler. My idle temperature is around 42°C. Any advice or tips would be helpful!

Cable setup isn't perfect, but here are some suggestions:
- Keep cables organized with zip ties or sleeves.
- Use cable management trays or clips to free up desk space.
- Consider a cable management case for better airflow and neatness.
A
AzoTax
01-27-2022, 11:55 PM #1

I'm running an AMD 5800x3d with a NZXT Kraken X53 cooler. My idle temperature is around 42°C. Any advice or tips would be helpful!

Cable setup isn't perfect, but here are some suggestions:
- Keep cables organized with zip ties or sleeves.
- Use cable management trays or clips to free up desk space.
- Consider a cable management case for better airflow and neatness.

R
ROCKET_RYNO
Junior Member
3
01-30-2022, 08:13 PM
#2
Temperature readings look typical, indicating the system is functioning properly. The background processes are producing normal heat. Curious about the source of concern—could it be a recent online trend?
R
ROCKET_RYNO
01-30-2022, 08:13 PM #2

Temperature readings look typical, indicating the system is functioning properly. The background processes are producing normal heat. Curious about the source of concern—could it be a recent online trend?

T
ThatMiningGuy
Senior Member
704
01-30-2022, 09:54 PM
#3
That's quite chilly for a 5800x3D. Don't stress too much, it's perfectly fine.
T
ThatMiningGuy
01-30-2022, 09:54 PM #3

That's quite chilly for a 5800x3D. Don't stress too much, it's perfectly fine.

C
coolman9222
Posting Freak
754
02-03-2022, 04:41 PM
#4
I noticed the readings stayed consistent at around 82°F with just 4100 peak speed. You were considering enabling precision boost overdrive, but it's unclear whether those temperatures warrant it.
C
coolman9222
02-03-2022, 04:41 PM #4

I noticed the readings stayed consistent at around 82°F with just 4100 peak speed. You were considering enabling precision boost overdrive, but it's unclear whether those temperatures warrant it.

N
Nikapplay
Junior Member
4
02-03-2022, 05:20 PM
#5
It seems like you're suggesting that everyone's temperatures are low, which might be an expectation issue.
N
Nikapplay
02-03-2022, 05:20 PM #5

It seems like you're suggesting that everyone's temperatures are low, which might be an expectation issue.

N
Nebel_Tobbi
Junior Member
19
02-04-2022, 08:52 AM
#6
What's your room temperature? Are you using the fan settings for the fans on the Rad? Have you replaced the cooler with a new TIM just in case it's a poor fit? How are your temperatures behaving during gameplay at full load for a significant period? I'll note that the X3D chips tend to run hotter than their non-X3D versions, which might point to silicon performance differences. Troubleshooting can be tricky without more details.
N
Nebel_Tobbi
02-04-2022, 08:52 AM #6

What's your room temperature? Are you using the fan settings for the fans on the Rad? Have you replaced the cooler with a new TIM just in case it's a poor fit? How are your temperatures behaving during gameplay at full load for a significant period? I'll note that the X3D chips tend to run hotter than their non-X3D versions, which might point to silicon performance differences. Troubleshooting can be tricky without more details.

X
xxuhuy
Member
129
02-05-2022, 08:44 PM
#7
Hey there! Just a quick heads-up about the double post—probably a fan curve thing. The 42C is perfectly acceptable at idle, which means the controller likely stays on a lower setting instead of chasing the absolute coldest possible temperature.
X
xxuhuy
02-05-2022, 08:44 PM #7

Hey there! Just a quick heads-up about the double post—probably a fan curve thing. The 42C is perfectly acceptable at idle, which means the controller likely stays on a lower setting instead of chasing the absolute coldest possible temperature.

X
XgAbYoP
Member
218
02-05-2022, 10:34 PM
#8
In Cinablench on multi-core, the temperature is currently 72°F. This scenario represents the maximum load condition.
X
XgAbYoP
02-05-2022, 10:34 PM #8

In Cinablench on multi-core, the temperature is currently 72°F. This scenario represents the maximum load condition.

A
Aeonfinis
Junior Member
46
02-13-2022, 07:11 AM
#9
The temperature in my room is currently 72°F. The fan is running at maximum speed. I've replaced the fan and added fresh thermal paste.
A
Aeonfinis
02-13-2022, 07:11 AM #9

The temperature in my room is currently 72°F. The fan is running at maximum speed. I've replaced the fan and added fresh thermal paste.