Current issue with the new system. Not posting functionality is reported.
Current issue with the new system. Not posting functionality is reported.
The CMOS wasn't cleared, so I'll keep it in storage for now. The CPU is brand new, except for the RAM which was reused from an old build. I don’t have another system to verify its condition, but it’s been functioning well for two years. I’ll replace it soon if needed and reply separately with any progress. Lastly, what does GVRD mean?
Greater Vancouver – you’re likely not here unless you’re aware, haha. I’ve assisted individuals before locally because sometimes a second pair of eyes or hardware testing is essential. If your memory doesn’t sync with the new CPU, it might not be supported or could have compatibility problems. Checking online confirms it should work. Mobo, CPU, and memory all seem compatible based on what I see. Try using RAM across every available channel (just one stick) – sometimes a poor memory channel causes issues, especially with 5000 series chips. Spend about 5-6 minutes on memory training. There’s a YouTube creator named Greg Salazar who has done extensive troubleshooting on bad memory modules and Ryzen 5000s; his videos might help you figure out if your setup matches the situation.
Thanks for the help! I’m actually quite far away, but I double-checked both RAM slots—it worked fine. Both sticks tested independently, so no issues there. I made sure the RAM was compatible and even tried reinstalling the 3100 CPU to confirm the BIOS update was applied correctly. Since it worked, I went back to the original BIOS version 2.40 and decided to switch to a newer one just in case. I’m planning to wait a day or two and watch some of Greg Salazar’s tutorials before giving up and taking it to a repair shop.
It's challenging when you're the tech expert but lack someone nearby with a machine to assist testing. Pinpointing defective components simplifies the troubleshooting process. Up to now, the only component we can't test for is the CPU. I noticed your message mentioning LEDs on the board, typically used for CPU/MEM modules. When the PC is turned on and you inspect the LEDs closely, observing if the CPU shows a red or yellow light would indicate a problem with that component. If the BIOS is current and compatible with the existing chip, then a red or yellow LED on the board pointing to the CPU would suggest an issue with the LED itself.
Sorry, it looks like the appearance might have been misinterpreted and the attached images only show onboard LEDs. I checked by connecting speakers to test for codes, which suggests a CPU problem. No pins appear bent, everything seems compatible, and it comes out of the box.
From what I observe on asrocks manuals, yellow signifies a RAM problem. However, if these are merely cosmetic, it might not be crucial. Still, as I mentioned earlier, RAM and AM4 components can be sensitive. Resetting the CMOS between CPU swaps could potentially assist.