Critical system failure occurred instantly.

Pages (3): Previous 1 2 3 Next

evogeli
Member

249

03-12-2019, 05:38 AM

#11

Have you adjusted the CL to 16 and turned on Gear Down Mode?

evogeli

03-12-2019, 05:38 AM #11

Have you adjusted the CL to 16 and turned on Gear Down Mode?

Soupermarkt
Junior Member

03-14-2019, 01:17 AM

#12

Current time is 17:19:19:39. Should I choose 16 19 19 19 39 or 16 18 18 18 38? What will happen then? It was set to auto mode.

Soupermarkt

03-14-2019, 01:17 AM #12

Current time is 17:19:19:39. Should I choose 16 19 19 19 39 or 16 18 18 18 38? What will happen then? It was set to auto mode.

ShadowGlobe
Member

124

03-14-2019, 02:13 AM

#13

16 19 19 19 39 Gear down assists in stabilizing RAM OC on Ryzen. This feature is typically turned on by default only during even-numbered timing cycles. If booting remains unsuccessful, consider raising the DRAM voltage to 1.375V and setting the SOC voltage to 1.1V.

ShadowGlobe

03-14-2019, 02:13 AM #13

XAnime_ChanX
Junior Member

03-14-2019, 05:27 AM

#14

Service request received.

XAnime_ChanX

03-14-2019, 05:27 AM #14

Service request received.

Josi802
Member

100

03-19-2019, 06:30 PM

#15

Terminate code storage handling again

Josi802

03-19-2019, 06:30 PM #15

Terminate code storage handling again

mccoop03
Posting Freak

910

04-05-2019, 01:39 AM

#16

Consider increasing the voltage to 18, 20, 20, 20, 40, 60 while keeping gear down active. If unsuccessful, detach one component and test sequentially.

mccoop03

04-05-2019, 01:39 AM #16

Consider increasing the voltage to 18, 20, 20, 20, 40, 60 while keeping gear down active. If unsuccessful, detach one component and test sequentially.

jaquza0502
Junior Member

04-05-2019, 08:37 AM

#17

No problem, the system encountered a blue screen during a critical process.

jaquza0502

04-05-2019, 08:37 AM #17

No problem, the system encountered a blue screen during a critical process.

Designx
Member

219

04-05-2019, 09:41 AM

#18

Yes, it involves testing just one stick before switching to the other.

Designx

04-05-2019, 09:41 AM #18

Yes, it involves testing just one stick before switching to the other.

McBroke
Member

168

04-05-2019, 10:14 AM

#19

Using a single stick at a time with the standard XMP profile causes the kmode exception to be ignored, resulting in a black screen.

McBroke

04-05-2019, 10:14 AM #19

Using a single stick at a time with the standard XMP profile causes the kmode exception to be ignored, resulting in a black screen.

KawiianMili
Posting Freak

786

04-05-2019, 11:09 AM

#20

Adjusted memory speed to 2133Mhz and executed MemTest. Aimed for near full utilization with 400% coverage to check stability. Let's observe if any issues arise. It seems I'm considering a faulty CPU IMC, which previously required an RMA after a 2700x model.

KawiianMili

04-05-2019, 11:09 AM #20

Pages (3): Previous 1 2 3 Next