Crashing games
Crashing games
I'm experiencing issues where the game freezes after about 10 minutes of play. I've tried fixing things like graphics drivers and memory diagnostics, but nothing seems to work. I also checked for viruses, but they're gone now. My system specs are: CPU Intel core 2 Quad Q9550, GPU Asus eah6670/dis/1gd5, 7GB RAM, Gigabyte P35-DS3 SSD, 250GB HDD, 400W PSU. I'm unsure what to do next.
Memory issues appear high in the registers, insufficient resources, power instability or temperature concerns are likely causes. Detailed specs would clarify this situation. These requirements often surface during troubleshooting. It brings to mind historical scenarios where only male doctors could examine patients directly, relying on verbal accounts from family members. Edited July 6, 2022 by Bombastinator
Is your CPU running at full speed? If not, you might be experiencing slow performance. If you're already pushing it (which is necessary for the 775), try resetting the OC settings and check if it improves things. Use Prime95 Large FFTs to compare OC and non-OC conditions. Could you share images of your RAM modules? It helps confirm the issue since a mismatched capacity raises suspicion, and mixing models could affect results, especially with OC adjustments.
the processor has been overclocked without issues so far, and I'm including a photo of the RAM here since I’m unsure of its brand. Otherwise, I’m certain it doesn’t overheat—during peak use I’ve reached around 55°C, and the GPU is about 60°C.
You can display a screenshot of the BIOS to check your OC options. I recommend reducing the CPU multiplier by one and using a large FFT at P95 to confirm the CPU isn’t causing problems—this suggests RAM or FSB might be the issue.
I'll explain it this way: the Turbo setting is already configured in the BIOS. I'm not sure if that qualifies as an overclock, but it might be.
Don't rely on auto cleanup tools, master manual OC techniques. Also, try displaying the turbo setting—played with a Giga G31M and noticed a sort of boost mode. It essentially forces your RAM to overclock, which isn't ideal; you should disable it to fix problems. For overclocking, CPU settings are pretty simple: just increase FSB and voltage. RAM and FSB are separate concerns. Mixing RAM types is risky, and FSB OC depends heavily on RAM performance. If you can swap or trade RAMs with matching chipsets (like using request seller options), it helps. VTT and NBT volt must be set correctly. I suggest adding a fan over the heatsink—place it above the CPU and below the PCIe slots. Safe limits: CPU and FSB around 1.6V, RAM depends on cooling but can handle up to 2.95V max. Most boards can handle 2.6V daily, but stick with 2.2 or 2.4V as general guidelines. Some older chips need lower voltages (like 2.38V for certain speeds), but degradation is usually minor unless it's worsening quickly.