F5F Stay Refreshed Hardware Desktop cpuJust upgrade cpu from i9-10850K to i9-10900KF now there no display and can't get to bios or anything

cpuJust upgrade cpu from i9-10850K to i9-10900KF now there no display and can't get to bios or anything

cpuJust upgrade cpu from i9-10850K to i9-10900KF now there no display and can't get to bios or anything

S
Siph18
Member
97
09-17-2020, 12:26 AM
#1
Hello, I just put in an i9-10900KF into my NZXT N7 Z490 with BIOS 1.80, the newest release. Previously I had an i9-10850K installed. I still keep the older CPU. Once I powered it up to the new one, no display signal appears and I connect to my GPU. Everything gets power properly. My keyboard RGB, mouse pad RGB, and any USB devices don't receive power or their colors fail to turn on. Any advice would be greatly appreciated.
S
Siph18
09-17-2020, 12:26 AM #1

Hello, I just put in an i9-10900KF into my NZXT N7 Z490 with BIOS 1.80, the newest release. Previously I had an i9-10850K installed. I still keep the older CPU. Once I powered it up to the new one, no display signal appears and I connect to my GPU. Everything gets power properly. My keyboard RGB, mouse pad RGB, and any USB devices don't receive power or their colors fail to turn on. Any advice would be greatly appreciated.

B
benbossgaming
Member
65
09-17-2020, 02:16 PM
#2
B
benbossgaming
09-17-2020, 02:16 PM #2

A
Ailinie
Member
160
09-17-2020, 03:33 PM
#3
Here the connection point
A
Ailinie
09-17-2020, 03:33 PM #3

Here the connection point

T
Tropiko14
Member
201
09-20-2020, 11:02 PM
#4
I share the socket though it's taking some time to adapt to the design.
T
Tropiko14
09-20-2020, 11:02 PM #4

I share the socket though it's taking some time to adapt to the design.

K
Kay123_
Senior Member
368
09-21-2020, 11:39 PM
#5
Observing quickly, these two pins seem mismatched. It might just be the photo—capturing CPU sockets isn’t easy, and if you follow the LGA 1200 pinout they’re likely just for the iGPU and a ground pin (which you probably don’t need to touch). Still worth checking closely. Spoiler: If you reinstall the chip and the system boots, it’s hard to prove your new chip is dead. Edited July 6, 2024 by RONOTHAN## Photo omitted
K
Kay123_
09-21-2020, 11:39 PM #5

Observing quickly, these two pins seem mismatched. It might just be the photo—capturing CPU sockets isn’t easy, and if you follow the LGA 1200 pinout they’re likely just for the iGPU and a ground pin (which you probably don’t need to touch). Still worth checking closely. Spoiler: If you reinstall the chip and the system boots, it’s hard to prove your new chip is dead. Edited July 6, 2024 by RONOTHAN## Photo omitted

R
Rubydex
Junior Member
40
09-26-2020, 11:43 PM
#6
Tried an older CPU and it performs identically.
R
Rubydex
09-26-2020, 11:43 PM #6

Tried an older CPU and it performs identically.

I
IceFlame56YT
Member
73
09-27-2020, 12:05 AM
#7
Only the same USB port supports the rear I/O, and the debug indicator functions during startup.
I
IceFlame56YT
09-27-2020, 12:05 AM #7

Only the same USB port supports the rear I/O, and the debug indicator functions during startup.

O
162
09-27-2020, 07:07 PM
#8
they use the bent pins and a sturdier razor to bend them back properly. The razor’s weight is helpful when you need to work freely without a socket for leverage. Also, the 10900kf isn’t an upgrade—wait for the 15th generation or Ryzen 9000 if you want a real improvement. This is my genuine reaction when I saw the title.
O
Oreos_In_Cream
09-27-2020, 07:07 PM #8

they use the bent pins and a sturdier razor to bend them back properly. The razor’s weight is helpful when you need to work freely without a socket for leverage. Also, the 10900kf isn’t an upgrade—wait for the 15th generation or Ryzen 9000 if you want a real improvement. This is my genuine reaction when I saw the title.

K
Klyner
Member
184
10-04-2020, 06:07 AM
#9
Updated. I understand it's not an upgrade, but I need a faster CPU and I'm limited by cost so I can't upgrade to the newest models. The best I could do was use the CPU that came with the board. Fixing my board wasn't worth it because there were more bent pins than initially thought, so I bought a new one. It should arrive by Tuesday at the latest and Thursday at the soonest. I'll let you know once I have the motherboard (note: grammar and spelling corrected). Edited July 8, 2024 by DOODLEROCKS9
K
Klyner
10-04-2020, 06:07 AM #9

Updated. I understand it's not an upgrade, but I need a faster CPU and I'm limited by cost so I can't upgrade to the newest models. The best I could do was use the CPU that came with the board. Fixing my board wasn't worth it because there were more bent pins than initially thought, so I bought a new one. It should arrive by Tuesday at the latest and Thursday at the soonest. I'll let you know once I have the motherboard (note: grammar and spelling corrected). Edited July 8, 2024 by DOODLEROCKS9

S
SuperGio02
Junior Member
43
10-04-2020, 07:00 AM
#10
The RAM isn't compatible with the motherboard, which is why I'm experiencing issues. My frustration has been resolved—I'm relieved!
S
SuperGio02
10-04-2020, 07:00 AM #10

The RAM isn't compatible with the motherboard, which is why I'm experiencing issues. My frustration has been resolved—I'm relieved!