F5F Stay Refreshed Hardware Desktop CPU white debug light on MSI KOTHERBOARD

CPU white debug light on MSI KOTHERBOARD

CPU white debug light on MSI KOTHERBOARD

Pages (2): 1 2 Next
H
Hetchok
Member
172
11-15-2020, 07:32 PM
#1
The problem with my PC involves a white CPU indicator appearing on the motherboard after I returned home yesterday. After reassembling it, it briefly powers up to the desktop, functions for three minutes, then freezes before restarting again triggers the same light. When I removed the RAM and tested each stick separately, it worked temporarily but lacked peripherals and display functionality. After adjusting the RAM placement, the CPU light returned, though the DRAM light remained on. Recently, I discovered the motherboard might be damaged, as everything appears to light up normally despite the issue. I built this system in summer 2022 and haven’t faced any problems before. I’m considering replacing the motherboard now. The specs are: AMD Ryzen 7 5800X Mobo, MSI b550 Gaming Plus, Corsair Vengeance 16GB (2x8GB) at 3600MHz, AMD RX6750 GPU, Corsair 750M PSU, and 80+ Gold.
H
Hetchok
11-15-2020, 07:32 PM #1

The problem with my PC involves a white CPU indicator appearing on the motherboard after I returned home yesterday. After reassembling it, it briefly powers up to the desktop, functions for three minutes, then freezes before restarting again triggers the same light. When I removed the RAM and tested each stick separately, it worked temporarily but lacked peripherals and display functionality. After adjusting the RAM placement, the CPU light returned, though the DRAM light remained on. Recently, I discovered the motherboard might be damaged, as everything appears to light up normally despite the issue. I built this system in summer 2022 and haven’t faced any problems before. I’m considering replacing the motherboard now. The specs are: AMD Ryzen 7 5800X Mobo, MSI b550 Gaming Plus, Corsair Vengeance 16GB (2x8GB) at 3600MHz, AMD RX6750 GPU, Corsair 750M PSU, and 80+ Gold.

N
Naqu6
Junior Member
4
11-16-2020, 03:29 PM
#2
Maybe I should start by clearing the CMOS. If that doesn’t help, check if you can return it for repair.
N
Naqu6
11-16-2020, 03:29 PM #2

Maybe I should start by clearing the CMOS. If that doesn’t help, check if you can return it for repair.

M
m4xesh3pard
Member
177
11-19-2020, 07:36 AM
#3
Typically, when the CPU indicator light appears, I check the RAM first. If the problem persists, I try connecting it to another RAM slot just in case the socket is faulty.
M
m4xesh3pard
11-19-2020, 07:36 AM #3

Typically, when the CPU indicator light appears, I check the RAM first. If the problem persists, I try connecting it to another RAM slot just in case the socket is faulty.

L
luxrox
Member
227
11-19-2020, 01:33 PM
#4
I've tried this several times before with no success. I ordered a new motherboard anyway because I've owned the PC for a year and a couple of months. I don't have time to wait weeks for a replacement, and I doubt I can return my old one since I can't find the user manual, which is required.
L
luxrox
11-19-2020, 01:33 PM #4

I've tried this several times before with no success. I ordered a new motherboard anyway because I've owned the PC for a year and a couple of months. I don't have time to wait weeks for a replacement, and I doubt I can return my old one since I can't find the user manual, which is required.

S
Skyguy_
Member
228
11-20-2020, 01:38 PM
#5
You've just set up your new ASUS ROG STRIX B550 F Gaming, and everything seems fine. Are you planning to reinstall Windows and drivers?
S
Skyguy_
11-20-2020, 01:38 PM #5

You've just set up your new ASUS ROG STRIX B550 F Gaming, and everything seems fine. Are you planning to reinstall Windows and drivers?

R
reddwarf1234
Member
219
11-25-2020, 01:25 AM
#6
I’d still process the return for the old board. A simple module replacement shouldn’t require a full reinstall, though it’s always a good idea to double-check.
R
reddwarf1234
11-25-2020, 01:25 AM #6

I’d still process the return for the old board. A simple module replacement shouldn’t require a full reinstall, though it’s always a good idea to double-check.

C
ChickenPhoYou
Posting Freak
850
11-30-2020, 11:22 PM
#7
Thanks! I also encountered an issue where connecting my controller via cable through my case's I/O causes the PC to lag. It might be related to the drivers. If you need help fixing them, let me know!
C
ChickenPhoYou
11-30-2020, 11:22 PM #7

Thanks! I also encountered an issue where connecting my controller via cable through my case's I/O causes the PC to lag. It might be related to the drivers. If you need help fixing them, let me know!

P
PrezonMrNacho
Junior Member
2
12-07-2020, 02:42 AM
#8
I previously encountered something similar and had questions about connecting to the front IO.
P
PrezonMrNacho
12-07-2020, 02:42 AM #8

I previously encountered something similar and had questions about connecting to the front IO.

P
Potansky
Member
166
12-12-2020, 12:40 AM
#9
I was using type C to type C before, as I received a type C on the front interface, but this new motherboard lacks a type C connector, making it simpler to purchase an adapter. Also, I think my previous motherboard failed due to power surges when connecting faulty USB cables; after trying a USB cable today, my peripherals and headset disconnected, requiring a reset. It seems the old motherboard had too many power surges, though I’m not sure.
P
Potansky
12-12-2020, 12:40 AM #9

I was using type C to type C before, as I received a type C on the front interface, but this new motherboard lacks a type C connector, making it simpler to purchase an adapter. Also, I think my previous motherboard failed due to power surges when connecting faulty USB cables; after trying a USB cable today, my peripherals and headset disconnected, requiring a reset. It seems the old motherboard had too many power surges, though I’m not sure.

X
XAnime_ChanX
Junior Member
44
12-12-2020, 04:31 AM
#10
It's quite unusual. Have you considered performing a fresh installation?
X
XAnime_ChanX
12-12-2020, 04:31 AM #10

It's quite unusual. Have you considered performing a fresh installation?

Pages (2): 1 2 Next