CPU Core I7 2600不适用

ZzTRAVISzZ
Junior Member

01-20-2018, 07:45 PM

I've been using an I3 3220 and it's running smoothly. Recently, I got an i7 2600 from my workplace and thought about upgrading. When trying to boot with the i7, it loads Windows but then restarts unexpectedly—sometimes on the desktop, other times it just loads without issues. The i3 is still fine. Any advice would be appreciated. Thanks!

ZzTRAVISzZ

01-20-2018, 07:45 PM #1

flyer78
Senior Member

425

01-27-2018, 11:31 PM

No, I haven't reset the BIOS.

flyer78

01-27-2018, 11:31 PM #2

No, I haven't reset the BIOS.

Berry_Burst
Member

01-28-2018, 12:05 AM

I've confirmed the CMOS is cleared, but I'm not entirely sure what you're referring to.

Berry_Burst

01-28-2018, 12:05 AM #3

I've confirmed the CMOS is cleared, but I'm not entirely sure what you're referring to.

Taybaybay
Posting Freak

850

01-28-2018, 01:18 AM

It seems to become unstable after installation, but it’s unclear if this is due to a fresh Windows setup.

Taybaybay

01-28-2018, 01:18 AM #4

It seems to become unstable after installation, but it’s unclear if this is due to a fresh Windows setup.

zMadeus
Posting Freak

755

02-08-2018, 04:45 AM

New setup just completed.

zMadeus

02-08-2018, 04:45 AM #5

New setup just completed.

csige791
Posting Freak

818

02-10-2018, 09:45 PM

It's conceivable the issue stems from the power supply's pin count not matching the motherboard's requirements.

csige791

02-10-2018, 09:45 PM #6

It's conceivable the issue stems from the power supply's pin count not matching the motherboard's requirements.

Carlster101
Member

02-17-2018, 12:03 PM

It seems the TDP of the i7 2600 is significantly greater than the i3, so perhaps you should consider a different PSU or it might just be a guess.

Carlster101

02-17-2018, 12:03 PM #7

It seems the TDP of the i7 2600 is significantly greater than the i3, so perhaps you should consider a different PSU or it might just be a guess.

eggman722
Member

176

02-17-2018, 04:32 PM

It seems the specific PSU you're referring to isn't clear, but given the issue with 20-pin availability and crashes, it might relate to a newer or less common power supply design. Could you provide more details?

eggman722

02-17-2018, 04:32 PM #8

Mel_Kawaii
Member

182

02-18-2018, 12:37 AM

It seems you're asking about a specific motherboard model. Would it be interesting if this were just a compatibility concern? Before purchasing, it's wise to verify its fit with your existing chipset.

Mel_Kawaii

02-18-2018, 12:37 AM #9

bellaaa_
Member

173

02-21-2018, 01:45 PM

#10

Hello, sorry to all of you. I’ve discovered the issue is the PSU only provides a 20-pin connector while the motherboard requires a 24-pin one after testing it with my main PC. Thank you for your assistance.

bellaaa_

02-21-2018, 01:45 PM #10