CPU cooler nearly makes contact with the GPU backplate
CPU cooler nearly makes contact with the GPU backplate
Only a thin sheet of paper can fit between these components. The nearest part is a tiny clip on the CPU cooler. After two weeks of use, temperatures have stayed normal. If it were to touch, it might not cause immediate issues, but prolonged contact could potentially lead to problems over time.
As long as contact is avoided, everything should be okay. In the past I experienced some snug fits without any problems. However, a very thin gap presents a different challenge. My main worry would be overheating—especially if the CPU cooler makes direct contact with the GPU backplate. Make sure there’s plenty of airflow from the front intake to keep things cool. I’m open to advice but want to be certain. Would rotating the cooler help expel hot air more effectively at the top of the case?
Share an image. They tend to be very near, but a clip shouldn't be almost touching—wondering about the mounting setup.
They aren't touching.To go into detail there is enough space to fit a piece of cardboard from the heatsink itself to backplate.However the tiny metal clips on the cooler are closer(paper thin gap)I can't move or rotate the cooler sadly.Temperatures are fine my gpu goes up to 75 degrees under load and CPU goes up to 70-75 under heavy gaming.(25-30degrees ambient)My only alternative is switching from matx motherboard to ATX motherboard i think.That way i can place the Gpu a slot below where it is now
Everything looks good, but I agree to request a photo for a clearer view.
Well you just explained that it's perfectly fine, so enjoy. Glad it's all sorted.