Could you clarify if you're asking about the potential for reduced performance and FPS after overclocking?

F5F Stay Refreshed Power Users Overclocking Could you clarify if you're asking about the potential for reduced performance and FPS after overclocking?

Could you clarify if you're asking about the potential for reduced performance and FPS after overclocking?

Could you clarify if you're asking about the potential for reduced performance and FPS after overclocking?

Pages (3): Previous 1 2 3

V

Vukmil
Member

94

11-17-2016, 03:57 AM

#21

It's a bit unusual then. From what I understand, 1.1v works well at 4.0Ghz with the 5820k. Do you have the VCore to Auto in the BIOS/UEFI settings? You might want to experiment slightly adjusting it, increasing it a little at a time while maintaining 4.0Ghz. The other possibility is the temp reader isn't accurate or something similar. If you can access the HSF, feel the heatpipes and check if they're hot, warm, or burning.

V

Vukmil

11-17-2016, 03:57 AM #21

It's a bit unusual then. From what I understand, 1.1v works well at 4.0Ghz with the 5820k. Do you have the VCore to Auto in the BIOS/UEFI settings? You might want to experiment slightly adjusting it, increasing it a little at a time while maintaining 4.0Ghz. The other possibility is the temp reader isn't accurate or something similar. If you can access the HSF, feel the heatpipes and check if they're hot, warm, or burning.

R

RazerKingPro
Junior Member

42

11-17-2016, 04:42 AM

#22

But if I choose factory overclock settings for a 4.0ghz boost, the voltage is 1.250v, meaning I should aim slightly above 1.110v. Perhaps around 1.150v would be better.

R

RazerKingPro

11-17-2016, 04:42 AM #22

But if I choose factory overclock settings for a 4.0ghz boost, the voltage is 1.250v, meaning I should aim slightly above 1.110v. Perhaps around 1.150v would be better.

Pages (3): Previous 1 2 3