F5F Stay Refreshed Hardware Desktop Could not connect to the motherboard MSI x470 gaming plus.

Could not connect to the motherboard MSI x470 gaming plus.

Could not connect to the motherboard MSI x470 gaming plus.

W
wybren
Member
74
07-31-2018, 12:49 AM
#1
This configuration functioned properly for a short period before I altered the memory module. After that change, turning on the machine produced no display output or sounds. All other components operated normally—motherboard LEDs lit, fans spun, and the graphics card was active. I examined the debug LED indicators, which cycled through states after each check, except the final one from top to bottom, which suggested a boot failure according to the manual. Have others encountered similar problems with this board? Any advice on resolving it, besides using the MSI X470 gaming plus board? I also have a Ryzen 7 1700 processor, a 2x Kingston HyperX Fury DDR4 8GB RAM, an M.2 SSD with 240GB, a 2TB HDD via SATA 4, and a Radeon RX 550 graphics card. The issue persisted even after clearing the CMOS.
W
wybren
07-31-2018, 12:49 AM #1

This configuration functioned properly for a short period before I altered the memory module. After that change, turning on the machine produced no display output or sounds. All other components operated normally—motherboard LEDs lit, fans spun, and the graphics card was active. I examined the debug LED indicators, which cycled through states after each check, except the final one from top to bottom, which suggested a boot failure according to the manual. Have others encountered similar problems with this board? Any advice on resolving it, besides using the MSI X470 gaming plus board? I also have a Ryzen 7 1700 processor, a 2x Kingston HyperX Fury DDR4 8GB RAM, an M.2 SSD with 240GB, a 2TB HDD via SATA 4, and a Radeon RX 550 graphics card. The issue persisted even after clearing the CMOS.

M
55
07-31-2018, 01:49 AM
#2
It might indicate a drive malfunction. Consider removing the SSD and attempting to access the BIOS settings.
M
MeltedMarsBarr
07-31-2018, 01:49 AM #2

It might indicate a drive malfunction. Consider removing the SSD and attempting to access the BIOS settings.

M
mwell777
Junior Member
3
07-31-2018, 02:01 AM
#3
Attempted it, but without a connected drive it doesn't work (I tried even with the HD also connected).
M
mwell777
07-31-2018, 02:01 AM #3

Attempted it, but without a connected drive it doesn't work (I tried even with the HD also connected).

E
Ender_Craft47
Posting Freak
866
07-31-2018, 03:50 AM
#4
Updated; I connected just the HD without an SSD and after a few restarts, the screen displayed a message indicating no boot drive was found—OS is installed on the SSD. When I reinstalled the SSD again, all the LEDs in the ez-debug remained off, yet the display showed nothing.
E
Ender_Craft47
07-31-2018, 03:50 AM #4

Updated; I connected just the HD without an SSD and after a few restarts, the screen displayed a message indicating no boot drive was found—OS is installed on the SSD. When I reinstalled the SSD again, all the LEDs in the ez-debug remained off, yet the display showed nothing.

C
crisboy1017
Junior Member
13
07-31-2018, 04:00 AM
#5
You're facing an issue accessing the BIOS despite having the HDD connected.
C
crisboy1017
07-31-2018, 04:00 AM #5

You're facing an issue accessing the BIOS despite having the HDD connected.

G
GERINGAS15
Member
63
07-31-2018, 05:04 AM
#6
I access the BIOS, then restart multiple times and reset the CMOS, finally getting the PC to boot and run Windows briefly before it becomes extremely sluggish and stops working.
G
GERINGAS15
07-31-2018, 05:04 AM #6

I access the BIOS, then restart multiple times and reset the CMOS, finally getting the PC to boot and run Windows briefly before it becomes extremely sluggish and stops working.