F5F Stay Refreshed Hardware Desktop Could not align fan speed and lighting settings across the connector and main board.

Could not align fan speed and lighting settings across the connector and main board.

Could not align fan speed and lighting settings across the connector and main board.

G
Gangster_Goat
Junior Member
4
12-14-2021, 10:07 PM
#1
Hi everyone, I'm having some trouble getting my Lian Li Unifans to function properly. I followed the instructions carefully, but everything seems a bit off. The system shows all fans and lights are connected as described in the manual: three PWM cables and three RGD cables feed into the Lian Li SL connector. In slot 4, only the RGB cable from the AIO is present, while the fan cable stays with the AIO. The motherboard connects via a USB header, a splitter to a 5V Addressable Gen2 header, and the chassis fan 2 header for power. According to the manual, the chassis fan 2 should be set to PWM mode. I'm using an ASUS B-550 E-Gaming board with the latest BIOS, and everything runs smoothly except for the fans and RGB lights. They work in rainbow mode by default, but they don't sync up with the motherboard or memory as expected. The ASUS Armory Crate seems to handle the motherboard and RAM sync correctly, yet my AIO and fan lights aren't responding. I can still control the pump on the AIO, but the L-connect software doesn't behave as it should. No RPM data is available, and even though the RGB and fan settings are enabled, they don't align properly. Any advice would be greatly appreciated! Thanks!
G
Gangster_Goat
12-14-2021, 10:07 PM #1

Hi everyone, I'm having some trouble getting my Lian Li Unifans to function properly. I followed the instructions carefully, but everything seems a bit off. The system shows all fans and lights are connected as described in the manual: three PWM cables and three RGD cables feed into the Lian Li SL connector. In slot 4, only the RGB cable from the AIO is present, while the fan cable stays with the AIO. The motherboard connects via a USB header, a splitter to a 5V Addressable Gen2 header, and the chassis fan 2 header for power. According to the manual, the chassis fan 2 should be set to PWM mode. I'm using an ASUS B-550 E-Gaming board with the latest BIOS, and everything runs smoothly except for the fans and RGB lights. They work in rainbow mode by default, but they don't sync up with the motherboard or memory as expected. The ASUS Armory Crate seems to handle the motherboard and RAM sync correctly, yet my AIO and fan lights aren't responding. I can still control the pump on the AIO, but the L-connect software doesn't behave as it should. No RPM data is available, and even though the RGB and fan settings are enabled, they don't align properly. Any advice would be greatly appreciated! Thanks!