F5F Stay Refreshed Hardware Desktop Corsair LXP on A320M DGS

Corsair LXP on A320M DGS

Corsair LXP on A320M DGS

N
NightCreeps
Junior Member
35
09-15-2018, 09:43 PM
#1
Hey! You're planning to upgrade your RAM for your ASRock A320M DGS. Let's check if it can hit that 3200MHz speed. With a Ryzen 5 2600, you'll want to set the right timings and voltages in BIOS. For DDR4-3200, aim for 1.2V and 4800/1600/2400 MHz speeds depending on your module. Make sure your BIOS version is P5.50 as you mentioned. If you're using the AMD A320M DGS, a compatible BIOS like the one linked should work well. Just double-check the specs of your RAM module to confirm compatibility.
N
NightCreeps
09-15-2018, 09:43 PM #1

Hey! You're planning to upgrade your RAM for your ASRock A320M DGS. Let's check if it can hit that 3200MHz speed. With a Ryzen 5 2600, you'll want to set the right timings and voltages in BIOS. For DDR4-3200, aim for 1.2V and 4800/1600/2400 MHz speeds depending on your module. Make sure your BIOS version is P5.50 as you mentioned. If you're using the AMD A320M DGS, a compatible BIOS like the one linked should work well. Just double-check the specs of your RAM module to confirm compatibility.

J
John_Scarce
Junior Member
45
09-15-2018, 11:25 PM
#2
A320 chipsets perform poorly in reaching the advertised memory rates; some succeed while others fall short.
J
John_Scarce
09-15-2018, 11:25 PM #2

A320 chipsets perform poorly in reaching the advertised memory rates; some succeed while others fall short.

E
Elitegirl05
Junior Member
5
09-15-2018, 11:47 PM
#3
That's not great... but I have to try, I believe it's still better than my 2400mhz 1x16gb setup with 17 clocks.
E
Elitegirl05
09-15-2018, 11:47 PM #3

That's not great... but I have to try, I believe it's still better than my 2400mhz 1x16gb setup with 17 clocks.

M
Milkcow289
Member
62
09-16-2018, 07:22 AM
#4
R5 2600 supports up to 3200Mhz, though the A320 chipset isn't optimal for this task. You should be able to run at 2933 or 2993, but not confident about 3200. Turn on XMP and stick with that speed.
M
Milkcow289
09-16-2018, 07:22 AM #4

R5 2600 supports up to 3200Mhz, though the A320 chipset isn't optimal for this task. You should be able to run at 2933 or 2993, but not confident about 3200. Turn on XMP and stick with that speed.

R
randomabby
Senior Member
476
09-18-2018, 07:40 PM
#5
Sure, I'll do my best to help. Where exactly are you trying to locate the XMP on this board? Because if you're searching everywhere, it might be worth checking specific spots or documentation.
R
randomabby
09-18-2018, 07:40 PM #5

Sure, I'll do my best to help. Where exactly are you trying to locate the XMP on this board? Because if you're searching everywhere, it might be worth checking specific spots or documentation.