Convert USB, Ethernet and Raspberry Pi into one setup.
Convert USB, Ethernet and Raspberry Pi into one setup.
Hello. I need to configure a setup where my primary PC connects via its Ethernet port, a USB-to-Ethernet adapter plugged into the PC via USB, and an Ethernet cable linked to my Raspberry Pi. When I attempt this, the device remains powered on but inactive. I’m less familiar with internet settings and can’t enable proxies. Any advice would be appreciated.
What RPi model are you using? Which USB Ethernet adapter is attached? Does the device recognize the network interface? What goal are you aiming for?
You're questioning the purpose of this setup and wondering if it's unnecessary. It seems like you're considering simpler alternatives, like connecting a device straight to a switch and powering it from the LAN.
I'm facing an issue because the network switch isn't reachable, and I'm trying to ensure everything uses a single LAN port. My setup has just one NIC on my PC, and I need a way for it to share internet access with the Raspberry Pi.
Checked Network Connections for detection of the Ethernet/USB adapter. If not showing up, try a simple gigabit managed switch at the networking port.
Your current configuration isn’t compatible with this setup. It’s better to either connect a switch and link both devices to it, or use Wi-Fi to configure the Pi or PC as a wireless hub.
It's not accurate to say that connecting both adapters in the PC makes it function properly—it turns into a Gigabit switch. I suggest opting for a dedicated Gigabit switch for better reliability, since the Pi remains operational even when the PC is off and no USB adapter fails.