Consider your needs and budget, then choose a suitable RAM model.
Consider your needs and budget, then choose a suitable RAM model.
I have a Ryzen 5 3400G on an Asrock x470 Master SLI/AC with 16GB of RAM (Corsiar LPX 3200MHz). I’m thinking about upgrading to 32GB because I can’t afford a GPU right now, and I’m starting to edit wedding videos professionally. I’m unsure what the new chipset will be or how it fits with my CPU. I want this upgrade, but I need to confirm compatibility. https://www.newegg.com/corsair-32gb-288-...6820236037 Is 3600MHz too high for my CPU? I’ve heard my CPU only goes up to 29xx, so does that rule it out? Could I still use it at 29xx and then get better speeds later? Maybe using CPUID HWmonitor would help, but I don’t see any RAM info. I’m just trying to figure this out, thanks for your help!
By the way, I enjoy playing games, though most of this is for work. I’m curious—could this mean I’m reaching a point where returns are minimal? Might an AMD WX2100 be a more sensible choice?
3600 is a reasonable load for your CPU, though memory compatibility mainly hinges on your motherboard. You can review the memory specifications Asrock has verified for your board at the provided link: https://www.asrock.com/MB/AMD/X470 Master SLIac/#MemoryRR. They mostly tested RAM up to 3000Mhz for Corsair, and your specific model isn’t listed there, so results may vary. In short: - Most DDR4 RAM should function well on your system. - 3600Mhz RAM will always run on your CPU/motherboard, possibly slower, depending on the board. It will operate at some speed. - The safest approach is to test it and configure the XMP profile on the motherboard (the profile that instructs it to run at 3600Mhz). - For optimal performance, match your RAM exactly with the full model number; otherwise, issues could arise. Unless you intend to replace your existing stick, compatibility won’t be an issue. - Check your current RAM speed in BIOS or via Ryzen Master (AMD tool); this will confirm what’s actually running. Good luck!
For improving GPU performance, the jump between a 3200 and 3600 MHz chip isn’t very noticeable unless you’re dealing with large files. The difference between 16GB and 32GB depends largely on file size. If your applications are GPU-accelerated, investing in a dedicated GPU would be more beneficial. However, some software runs only on the CPU, so that won’t help much. The WX2100 offers performance comparable to the RX Vega 11 built into your CPU, which means it won’t provide a noticeable boost unless you upgrade further.
This setup should perform adequately with the available resources. The extra RAM can improve transfer speeds and help manage the workload. Upgrading to NVMe storage will likely enhance performance regardless of the amount of RAM you use. You’re not using the full capacity of your current 4-slot module, so adding more RAM won’t cause issues. The 3600 processor speed should be sufficient for most projects, though a higher model like 3800 would be even better if budget allows.
Google results suggest Davinci Resolve utilizes GPU acceleration for multiple functions. You could try the 3600 MHz setting to test performance; it should function at some rate. However, achieving 3600 MHz may require adjusting the XMP profile in BIOS. Regarding your CPU (3400G, codename Picasso), the maximum supported speed is 2933 MHz. While you might achieve 3600 MHz occasionally, it's unlikely. Using two memory sticks won't significantly impact performance, as your motherboard only supports dual-channel memory. RAM won't improve transfer speeds. If you're at 16GB and need more, consider upgrading to a better GPU instead.