F5F Stay Refreshed Power Users Overclocking Consider whether it's beneficial to attempt overclocking the FX 8370.

Consider whether it's beneficial to attempt overclocking the FX 8370.

Consider whether it's beneficial to attempt overclocking the FX 8370.

H
Horsemoney
Junior Member
25
03-09-2016, 08:45 AM
#1
The title indicates that I've had 8370 for about a year without trying to overclock. I have some experience with previous FX overclocking, but I'm curious about whether it's effective and what temperatures are typically achieved. What should the temperatures be? I own a good aftermarket wind cooler (like the 212).

MOBO: Gigabyte UD3 FXA
RAM: 2x4 ADATA at 1333MHz
POWER: Seasonic 620W
H
Horsemoney
03-09-2016, 08:45 AM #1

The title indicates that I've had 8370 for about a year without trying to overclock. I have some experience with previous FX overclocking, but I'm curious about whether it's effective and what temperatures are typically achieved. What should the temperatures be? I own a good aftermarket wind cooler (like the 212).

MOBO: Gigabyte UD3 FXA
RAM: 2x4 ADATA at 1333MHz
POWER: Seasonic 620W

S
Seve_PT
Member
229
03-09-2016, 10:06 AM
#2
Do you really need OC it?
S
Seve_PT
03-09-2016, 10:06 AM #2

Do you really need OC it?

Q
Quick_Pots
Member
120
03-11-2016, 09:26 AM
#3
With a high-quality motherboard and power supply, you're all set. However, your cooler might struggle - the FX-8370 produces significant heat during overclocking. A quality liquid cooling solution is recommended, or ideally, the top air coolers available.
Q
Quick_Pots
03-11-2016, 09:26 AM #3

With a high-quality motherboard and power supply, you're all set. However, your cooler might struggle - the FX-8370 produces significant heat during overclocking. A quality liquid cooling solution is recommended, or ideally, the top air coolers available.

D
DKing2001
Junior Member
8
03-14-2016, 02:05 AM
#4
Yes, you can overclock as well... The main concern is finding the right balance. You might be able to raise it to around 4.4 or 4.5 Ghz without significantly changing the Vcore voltage. However, even a slight increase in Vcore leads to considerable heat generation, so avoid setting your motherboard BIOS to Auto Vcore. A speed of 4.5 Ghz would provide a good performance boost, but if temperatures rise too high, reduce both speed and voltage slightly.
D
DKing2001
03-14-2016, 02:05 AM #4

Yes, you can overclock as well... The main concern is finding the right balance. You might be able to raise it to around 4.4 or 4.5 Ghz without significantly changing the Vcore voltage. However, even a slight increase in Vcore leads to considerable heat generation, so avoid setting your motherboard BIOS to Auto Vcore. A speed of 4.5 Ghz would provide a good performance boost, but if temperatures rise too high, reduce both speed and voltage slightly.

N
NaiROolF
Senior Member
685
03-14-2016, 09:47 AM
#5
Choose a suitable motherboard and power supply unit. Certain boards have issues with FX8xxx chips even in stock, and OC is not recommended. A reliable, high-quality PSU is also necessary.
N
NaiROolF
03-14-2016, 09:47 AM #5

Choose a suitable motherboard and power supply unit. Certain boards have issues with FX8xxx chips even in stock, and OC is not recommended. A reliable, high-quality PSU is also necessary.

G
GoMigs
Senior Member
614
03-21-2016, 10:50 PM
#6
Looking for the right motherboard and power supply? Some boards have trouble with FX8xxx chips even at stock, and a reliable PSU is essential. The recommended setup includes the Gigabyte UD3 FXA board, 2x4 ADATA RAM at 1333MHz, and a Seasonic 620W PSU.
G
GoMigs
03-21-2016, 10:50 PM #6

Looking for the right motherboard and power supply? Some boards have trouble with FX8xxx chips even at stock, and a reliable PSU is essential. The recommended setup includes the Gigabyte UD3 FXA board, 2x4 ADATA RAM at 1333MHz, and a Seasonic 620W PSU.

R
Royal_Sniper
Member
54
03-21-2016, 11:40 PM
#7
The PSU is fine, but the motherboard might be overloading it.
R
Royal_Sniper
03-21-2016, 11:40 PM #7

The PSU is fine, but the motherboard might be overloading it.