Consider upgrading your CPU if you want better performance.
Consider upgrading your CPU if you want better performance.
Hello everyone!
I'm thinking about whether to go overclock my FX 8350 instead of using Turbo Boost. I enjoy playing games like Battlefield 4 and Hardline, as well as Minecraft.
My current configuration is:
FX-8350
Hyper Evo 212
GA-990FXA-UD3 rev 4.0
XFX R9 280X DD black edition
Cooler Master G750M PSU
I ran a system stability test with Aida64 extreme, and my CPU stayed under 40 ºC at full load (though the fans aren't maxed out yet).
I'm not planning a massive overclock, aiming for around 4.2-4.4. Would you think a slight boost would help my Battlefield performance? I usually get about 70 fps, but sometimes it drops to 55 fps in more demanding maps (Ultra settings).
Thanks in advance for any advice!
Other users might be able to assist, particularly in CPU-intensive titles such as Battlefield. With a good aftermarket cooler already installed, you're ready to begin overclocking.
However, you'll have to exceed 4.2Ghz to see any noticeable improvement, since the standard turbo clock is already at that level.
You might consider pushing it to 4.5Ghz without raising the voltage just to test the impact on performance.
Some OC enthusiasts will definitely assist, particularly in CPU-intensive titles such as Battlefield. With your existing high-end aftermarket cooler, you’re ready to begin overclocking.
However, you’ll need to exceed 4.2Ghz to see any noticeable improvement, since the standard turbo clock is already at that level.
You might consider pushing to 4.5Ghz without raising the voltage just to test the effect on performance.
Is it always secure to boost to 4.5Ghz without increasing the voltage? Will it still boot properly? How much will the temperatures rise by doing this? Is it more stable to overclock at 4.5Ghz rather than relying on turbo boost? I’ve heard that turbo can significantly raise the voltage, making it potentially riskier than a modest overclock. Is that accurate?
Turbo boosts voltage when you push the stock speed beyond its limit. That’s why you disable turbo mode right after overclocking. It seems unlikely you can maintain 4.5 Ghz without a voltage rise, probably around 1.4 to 1.45 volts. For air coolers, 4.4 to 4.5 is usually the upper range achievable.
This amount of voltage is quite common, many users manage to run at 4.5Ghz with just 1.35v. Regardless of how much you overclock your CPU, your PC will still boot because the CPU isn't handling heavy tasks during startup. If you push it too much, you can always reduce it again. The turbo boosts the voltage significantly, so enabling manual voltage control is recommended. Just ensure the CPU stays below 60°C under full load to avoid issues.
Each cpu behaves differently when it comes to stable overclocking. Make gradual adjustments and perform a stress test after each change. If temperatures rise too much or the system becomes unstable, reduce the settings slightly back to the previous stable ones.
To begin, I plan to slightly increase the multiplier and run a stress test without raising the voltage. I’m really worried about damaging my system.
Do you have any recommendations for a video or forum tutorial on overclocking the fx 8350 (especially for a ga-990fxa-ud3 mb)? I’ve searched, but I’m unsure which settings to adjust and what the most effective method is—like starting with the multiplier first and then tweaking voltage until it stabilizes.