F5F Stay Refreshed Power Users Networks Consider upgrading to a newer router and modem for better performance.

Consider upgrading to a newer router and modem for better performance.

Consider upgrading to a newer router and modem for better performance.

D
DevilDoggy657
Senior Member
530
07-03-2016, 07:38 AM
#1
Hello everyone, I've returned to the old house after my mom's passing to lend a hand. My sister and I still use that old router and modem setup from several years ago. I'm thinking about improving both for better performance. Faster speeds would be great, but reliability is the main concern. Do you have any ideas for upgrades? From what I see on the bill, they're on the Cox Internet Preferred 150 plan with about 150 Mbps downloads. There are likely outages due to outdated gear and coverage gaps, especially upstairs where my PC sits. I'm hoping for a more stable modem and router, preferably with stronger hardware that could boost the signal without needing a booster or repeater. A more robust setup would be ideal. Thanks for any advice on new equipment. I should mention I'm flexible on budget and comfortable paying a bit more for better quality. Stay safe, everyone. Bob
D
DevilDoggy657
07-03-2016, 07:38 AM #1

Hello everyone, I've returned to the old house after my mom's passing to lend a hand. My sister and I still use that old router and modem setup from several years ago. I'm thinking about improving both for better performance. Faster speeds would be great, but reliability is the main concern. Do you have any ideas for upgrades? From what I see on the bill, they're on the Cox Internet Preferred 150 plan with about 150 Mbps downloads. There are likely outages due to outdated gear and coverage gaps, especially upstairs where my PC sits. I'm hoping for a more stable modem and router, preferably with stronger hardware that could boost the signal without needing a booster or repeater. A more robust setup would be ideal. Thanks for any advice on new equipment. I should mention I'm flexible on budget and comfortable paying a bit more for better quality. Stay safe, everyone. Bob

L
Lil_Shorty
Member
202
07-03-2016, 07:55 AM
#2
Is the modem equipped with an Ethernet port? If yes, you can operate it similarly to what Linus demonstrated in the video. Locals often suggest using Ubiquiti products, so I might consider that option. However, setting up wireless devices requires careful planning. It would help to have a clear diagram showing where each device is located or placed, so everyone knows its position and placement.
L
Lil_Shorty
07-03-2016, 07:55 AM #2

Is the modem equipped with an Ethernet port? If yes, you can operate it similarly to what Linus demonstrated in the video. Locals often suggest using Ubiquiti products, so I might consider that option. However, setting up wireless devices requires careful planning. It would help to have a clear diagram showing where each device is located or placed, so everyone knows its position and placement.

A
aidsarecool
Junior Member
5
07-03-2016, 11:13 AM
#3
It includes an Ethernet port, yet there are multiple PCs throughout the home, spanning several floors. The setup is a two-story residence where the modem and router are located downstairs, creating a dead zone in the upstairs bedroom about 30 feet away. Obstructions on the walls are probably causing interference with the signal. My NZXT desktop (top-of-the-line build) can sense the wireless connection, but it remains weak and unstable at that distance. Bob
A
aidsarecool
07-03-2016, 11:13 AM #3

It includes an Ethernet port, yet there are multiple PCs throughout the home, spanning several floors. The setup is a two-story residence where the modem and router are located downstairs, creating a dead zone in the upstairs bedroom about 30 feet away. Obstructions on the walls are probably causing interference with the signal. My NZXT desktop (top-of-the-line build) can sense the wireless connection, but it remains weak and unstable at that distance. Bob

A
alexagas
Member
210
07-04-2016, 09:51 AM
#4
I believe UniFi In-Wall APs are solid choices. Opt for the HD model for the latest Wave 2 with enhanced 5 GHz bandwidth, or go with the AC version if you think it meets your requirements. Verify your devices can handle 5 GHz and 802.11ac; otherwise, the device might not perform well. If you're using those gadgets, don't overlook the POE Injector for the APs—upgrading the router isn't necessary since any ISP gateway would suffice.
A
alexagas
07-04-2016, 09:51 AM #4

I believe UniFi In-Wall APs are solid choices. Opt for the HD model for the latest Wave 2 with enhanced 5 GHz bandwidth, or go with the AC version if you think it meets your requirements. Verify your devices can handle 5 GHz and 802.11ac; otherwise, the device might not perform well. If you're using those gadgets, don't overlook the POE Injector for the APs—upgrading the router isn't necessary since any ISP gateway would suffice.

F
FaTaL_ZiPz
Member
51
07-08-2016, 05:12 AM
#5
Verify if the provider offers an approved device catalog. Certain internet service providers have strict guidelines on which customer-owned hardware may connect to their infrastructure. Do you need a different gateway or multiple standalone units?
F
FaTaL_ZiPz
07-08-2016, 05:12 AM #5

Verify if the provider offers an approved device catalog. Certain internet service providers have strict guidelines on which customer-owned hardware may connect to their infrastructure. Do you need a different gateway or multiple standalone units?

V
Vonler
Member
53
07-16-2016, 03:43 AM
#6
I'm evaluating a fresh router and cable modem. The previous models are outdated and often require resetting, which means they're approaching failure points and replacement is the best option. I prioritize dependability and consistent performance, while also wanting maximum power from the router to minimize dead spots. If that doesn't work, I'll need a Wi-Fi repeater or booster. Since my home isn't modernly wired, a wireless solution will be necessary.
V
Vonler
07-16-2016, 03:43 AM #6

I'm evaluating a fresh router and cable modem. The previous models are outdated and often require resetting, which means they're approaching failure points and replacement is the best option. I prioritize dependability and consistent performance, while also wanting maximum power from the router to minimize dead spots. If that doesn't work, I'll need a Wi-Fi repeater or booster. Since my home isn't modernly wired, a wireless solution will be necessary.

W
201
07-16-2016, 04:27 AM
#7
Check Cox's site for any rules about customer-owned modems. Focus on SB6183, CM500, and CM600 models. Avoid all Docsis 3.0 32-channel units (like SB6190) due to the faulty Intel Puma 6 chip. For a 32-channel setup, choose a Docsis 3.1 modem. Router selection should be tailored to your home layout. I reside in a 1300 sq ft home partially constructed in the 1930s, with recent updates. Our Synology RT 2600AC router covers the entire house and yard. Since we're big on video streaming and most devices connect via WiFi—except my PC, Plex server, and NAS—I recommend considering other solutions if a repeater is needed. If you suspect a need for a repeater, explore ASUS routers that support AI Mesh or mesh networks.
W
wilger_monster
07-16-2016, 04:27 AM #7

Check Cox's site for any rules about customer-owned modems. Focus on SB6183, CM500, and CM600 models. Avoid all Docsis 3.0 32-channel units (like SB6190) due to the faulty Intel Puma 6 chip. For a 32-channel setup, choose a Docsis 3.1 modem. Router selection should be tailored to your home layout. I reside in a 1300 sq ft home partially constructed in the 1930s, with recent updates. Our Synology RT 2600AC router covers the entire house and yard. Since we're big on video streaming and most devices connect via WiFi—except my PC, Plex server, and NAS—I recommend considering other solutions if a repeater is needed. If you suspect a need for a repeater, explore ASUS routers that support AI Mesh or mesh networks.

R
RepoRizer
Posting Freak
872
07-16-2016, 04:34 AM
#8
Explored technology similar to MeshForce, though not exactly the same. DOCSIS 3.1 is a relevant reference. Cox offers its own network called Panoramic Wifi, but it tends to be on the pricier side. It seems there aren't many competing mesh solutions listed in their equipment catalog, especially top-tier hardware options.
R
RepoRizer
07-16-2016, 04:34 AM #8

Explored technology similar to MeshForce, though not exactly the same. DOCSIS 3.1 is a relevant reference. Cox offers its own network called Panoramic Wifi, but it tends to be on the pricier side. It seems there aren't many competing mesh solutions listed in their equipment catalog, especially top-tier hardware options.

A
Arzuzizu
Member
152
07-16-2016, 12:36 PM
#9
I'm being straightforward. I wouldn't opt for a modem-router combo. It's better to use separate devices. Although it might cost more upfront, it could save you money over time. Cable modems have a long lifespan—over five years with consistent performance—and I've changed my router twice during that period. WiFi standards evolve faster than the Docsis specs. Even though Docsis 4.0 is being developed, it won't be widely adopted for years, and cable providers probably won't need it anytime soon since your chosen service level won't require it then.
A
Arzuzizu
07-16-2016, 12:36 PM #9

I'm being straightforward. I wouldn't opt for a modem-router combo. It's better to use separate devices. Although it might cost more upfront, it could save you money over time. Cable modems have a long lifespan—over five years with consistent performance—and I've changed my router twice during that period. WiFi standards evolve faster than the Docsis specs. Even though Docsis 4.0 is being developed, it won't be widely adopted for years, and cable providers probably won't need it anytime soon since your chosen service level won't require it then.