Consider enhancing your system with a RAM upgrade.
Consider enhancing your system with a RAM upgrade.
You have 16GB of Corsair Vengeance LX 2133MHz RAM installed, and you're considering an upgrade. It's understandable to be unsure—your motherboard supports dual-channel, but mixing speeds isn't recommended. Getting another 16GB of the same speed would provide a solid boost, especially if you're already running at 8GB. Upgrading to higher-speed RAM (like 3200MHz or more) could further improve performance. Stick with matching speeds for best results.
For regular gaming, 16GB is sufficient. Combining the 3600MHz and 2133MHz RAM could reduce performance, possibly bringing speeds down to around 2133 unless the new setup works well. Swapping the existing 2133 with the 3600MHz RAM would likely improve speed.
Yes, mixing 2 speeds is possible, though it may cause the system to run slower. It’s better to choose a 2400MHz and set the speed to 2400 directly instead of overclocking the 2133.
Certainly, you're able to do this immediately. Press DEL when the computer starts to open the BIOS. Look for an option labeled memory spd (auto) and click on auto, then pick your desired speed—2400MHz is a good starting point. If it runs smoothly, keep using it; if not, try increasing to 2666. Setting it to auto should restore stability.
I recommend checking the details on YouTube for the memory adjustment.
16 GB works well for gaming and everyday tasks. I chose 32 GB mainly because I work with software tools like Docker. In reality, I usually use about 17-18 GB; 16 was just a bit too little. A better choice would be to replace the two existing drives with a single 16 GB drive at 3600MHz CL16, costing roughly $70 to $100 depending on the brand and options. Going to 32 GB offers no real advantage unless you really need more space. If you don’t exceed 16 GB, upgrading is pointless—it’s just unnecessary spending. Even for those needing 32 GB, a 2x16 GB 3600MHz setup would be more practical and cost-effective, priced around $150.