F5F Stay Refreshed Hardware Desktop Consider adjusting your ventilation settings or adding a fan to enhance circulation.

Consider adjusting your ventilation settings or adding a fan to enhance circulation.

Consider adjusting your ventilation settings or adding a fan to enhance circulation.

W
wolfy2004
Junior Member
14
08-18-2020, 12:31 AM
#1
I just started playing Final Fantasy 7 Remake on Steam and it crashed after roughly ten minutes. I'm using a Radeon RX 6800XT and running the game at 4K with 60 frames per second. It seems my PC might not have enough power for this setting, even though the fans are directing air properly. After the crash, I noticed the temperature inside and thought about cleaning it out again—since it's been over a year since the last clean. I cleaned everything out and replaced the dust filters, which were really dirty. Now I'm curious about ways to boost airflow in my system. All the fans appear to be working correctly, bringing cool air in and expelling warm air out.
W
wolfy2004
08-18-2020, 12:31 AM #1

I just started playing Final Fantasy 7 Remake on Steam and it crashed after roughly ten minutes. I'm using a Radeon RX 6800XT and running the game at 4K with 60 frames per second. It seems my PC might not have enough power for this setting, even though the fans are directing air properly. After the crash, I noticed the temperature inside and thought about cleaning it out again—since it's been over a year since the last clean. I cleaned everything out and replaced the dust filters, which were really dirty. Now I'm curious about ways to boost airflow in my system. All the fans appear to be working correctly, bringing cool air in and expelling warm air out.

P
PapyMulti
Junior Member
5
08-18-2020, 04:33 AM
#2
The area between the wall and my PC has a gap. The floor is made of carpet, but I put a wooden panel in between the floor and the PC to avoid clogs and enhance ventilation.
P
PapyMulti
08-18-2020, 04:33 AM #2

The area between the wall and my PC has a gap. The floor is made of carpet, but I put a wooden panel in between the floor and the PC to avoid clogs and enhance ventilation.

D
duhazneubin
Senior Member
583
08-21-2020, 05:26 AM
#3
Human skin rarely provides a precise reading for temperature changes. It's better to rely on tools like HWInfo64 for monitoring. Your senses can still help—visible dust buildup suggests cleaning is needed. For temperatures, check if the fans are directing air consistently; ensure both the CPU cooler fans and rear case fans are blowing in the same direction. This isn't obvious from images alone.
D
duhazneubin
08-21-2020, 05:26 AM #3

Human skin rarely provides a precise reading for temperature changes. It's better to rely on tools like HWInfo64 for monitoring. Your senses can still help—visible dust buildup suggests cleaning is needed. For temperatures, check if the fans are directing air consistently; ensure both the CPU cooler fans and rear case fans are blowing in the same direction. This isn't obvious from images alone.

G
Gr33nFlar3
Member
158
08-28-2020, 11:57 PM
#4
Previously, I enhanced my setup a while ago by aligning all the fans correctly—fronts facing inward and backs outward—to allow fresh air to come in and warm air to exit.
G
Gr33nFlar3
08-28-2020, 11:57 PM #4

Previously, I enhanced my setup a while ago by aligning all the fans correctly—fronts facing inward and backs outward—to allow fresh air to come in and warm air to exit.

Y
YOLO_Sven
Junior Member
17
08-31-2020, 04:57 AM
#5
It seems your PSU might not handle continuous high power without overheating. The design pulls air from underneath, and a carpeted surface could cause issues. The CX750M should work fine otherwise. You might also consider flipping it upside down so air enters from inside rather than the bottom. Regarding airflow, removing unused drive bays would free up space and let front fans operate more freely.
Y
YOLO_Sven
08-31-2020, 04:57 AM #5

It seems your PSU might not handle continuous high power without overheating. The design pulls air from underneath, and a carpeted surface could cause issues. The CX750M should work fine otherwise. You might also consider flipping it upside down so air enters from inside rather than the bottom. Regarding airflow, removing unused drive bays would free up space and let front fans operate more freely.

_
_khalid
Junior Member
2
08-31-2020, 05:45 AM
#6
This setup isn't the H510 model. The airflow from the front isn't very strong, so lowering the front fan speed could help. Let the rear exhaust fan generate more negative pressure, allowing the GPU to draw in fresh air from the rear I/O zone.
_
_khalid
08-31-2020, 05:45 AM #6

This setup isn't the H510 model. The airflow from the front isn't very strong, so lowering the front fan speed could help. Let the rear exhaust fan generate more negative pressure, allowing the GPU to draw in fresh air from the rear I/O zone.

R
ReaZzon
Member
58
08-31-2020, 06:46 AM
#7
I’ve completed the changes as illustrated. The metal supports securing the drive bays are welded into the case, leaving no room for an SSD. Modding might be the best option. The case is a Bitfenix Neos, a low-budget build meant mainly for beginners. It offers minimal cooling and quiet performance. Right now I lack funds for a better case. Would downloading HWinfo64 help with this?
R
ReaZzon
08-31-2020, 06:46 AM #7

I’ve completed the changes as illustrated. The metal supports securing the drive bays are welded into the case, leaving no room for an SSD. Modding might be the best option. The case is a Bitfenix Neos, a low-budget build meant mainly for beginners. It offers minimal cooling and quiet performance. Right now I lack funds for a better case. Would downloading HWinfo64 help with this?

F
Fred10244
Posting Freak
937
08-31-2020, 07:28 AM
#8
HWInfo64 can assist in checking your temperatures and determining if they are optimal, however, adjusting fan speeds is usually done through the BIOS settings.
F
Fred10244
08-31-2020, 07:28 AM #8

HWInfo64 can assist in checking your temperatures and determining if they are optimal, however, adjusting fan speeds is usually done through the BIOS settings.

J
JKGamer1987
Junior Member
5
08-31-2020, 01:54 PM
#9
Previously, we relied on BIOS to set up the system, and today we can still do it. If you're uncomfortable with BIOS, check the user guide that came with your motherboard—it usually includes instructions for adjusting fan speeds on your particular board.
J
JKGamer1987
08-31-2020, 01:54 PM #9

Previously, we relied on BIOS to set up the system, and today we can still do it. If you're uncomfortable with BIOS, check the user guide that came with your motherboard—it usually includes instructions for adjusting fan speeds on your particular board.

X
xRedxNightx
Member
176
09-22-2020, 11:15 AM
#10
I've taken out the metal cover from my case, which should boost airflow significantly. I hope this helps since I damaged the pliers while removing the bolts and can't get them back on.
X
xRedxNightx
09-22-2020, 11:15 AM #10

I've taken out the metal cover from my case, which should boost airflow significantly. I hope this helps since I damaged the pliers while removing the bolts and can't get them back on.