F5F Stay Refreshed Power Users Overclocking Consider adjusting your overclock settings for the 3570K model.

Consider adjusting your overclock settings for the 3570K model.

Consider adjusting your overclock settings for the 3570K model.

Pages (3): 1 2 3 Next
T
Takumi1010
Junior Member
41
09-22-2025, 11:09 PM
#1
I successfully reached an overclock of 4.6Ghz at 1.275V, though temperatures stayed below the high 80s during testing with IBT and P95.
I installed conductonaut as a TIM between die and IHS, and Kryonaut between IHS and cooler.
Later, I improved to 4.9Ghz with 1.475V, and achieved 4.8Ghz at 1.365V and 4.7Ghz at 1.295V, averaging around that.
I won’t push the processor beyond 1.5V to avoid exceeding 5Ghz.
Current temperatures are in the low 80s during stress tests (max 83°C IBT, 75°C P95), and under 65°C during gaming, with ambient temps between 33–35°C.
My overclock seems stable for continuous use; otherwise, lowering voltage might be wise.
CPU specifications are listed in my signature.
Note: Used the offset method with C1E enabled.
T
Takumi1010
09-22-2025, 11:09 PM #1

I successfully reached an overclock of 4.6Ghz at 1.275V, though temperatures stayed below the high 80s during testing with IBT and P95.
I installed conductonaut as a TIM between die and IHS, and Kryonaut between IHS and cooler.
Later, I improved to 4.9Ghz with 1.475V, and achieved 4.8Ghz at 1.365V and 4.7Ghz at 1.295V, averaging around that.
I won’t push the processor beyond 1.5V to avoid exceeding 5Ghz.
Current temperatures are in the low 80s during stress tests (max 83°C IBT, 75°C P95), and under 65°C during gaming, with ambient temps between 33–35°C.
My overclock seems stable for continuous use; otherwise, lowering voltage might be wise.
CPU specifications are listed in my signature.
Note: Used the offset method with C1E enabled.

_
_HarryMan_
Member
66
09-22-2025, 11:09 PM
#2
Additional question, System remains stable at manual voltage of 1.475. In offset mode it fails during Heaven benchmark due to incorrect voltage readings and crashes. Any alternative solution other than raising the offset? I increased the offset to 1.495 but it still fails in Heaven Benchmark, though stable in P95 and IBT. UPDATE: Achieved stability in offset mode by adding 0.330V with my VID (1.169V), reaching 1.52V at full load.
_
_HarryMan_
09-22-2025, 11:09 PM #2

Additional question, System remains stable at manual voltage of 1.475. In offset mode it fails during Heaven benchmark due to incorrect voltage readings and crashes. Any alternative solution other than raising the offset? I increased the offset to 1.495 but it still fails in Heaven Benchmark, though stable in P95 and IBT. UPDATE: Achieved stability in offset mode by adding 0.330V with my VID (1.169V), reaching 1.52V at full load.

L
LucasandClaus
Senior Member
438
09-22-2025, 11:09 PM
#3
Core performance stays stable at up to 1.4v continuously (intel specs). Same limits apply for LGA 1156 and LGA 1155. After a year of running gen1 at 1.45v without any drops, around 1.425v seems safe for longer use. For a one-year lifespan, keep under 1.45; beyond that aim for 1.4–1.425 to preserve longevity.
L
LucasandClaus
09-22-2025, 11:09 PM #3

Core performance stays stable at up to 1.4v continuously (intel specs). Same limits apply for LGA 1156 and LGA 1155. After a year of running gen1 at 1.45v without any drops, around 1.425v seems safe for longer use. For a one-year lifespan, keep under 1.45; beyond that aim for 1.4–1.425 to preserve longevity.

G
GioRollins
Member
53
09-22-2025, 11:09 PM
#4
I've noticed in the overclocking scene that voltage remains relevant until temperatures stay within limits. The Ivy Bridge design supports a maximum of 105V and 1.52A as per Intel guidelines. My setup won't work at 1.49V continuously due to offset OC and C1E being active. During gameplay it could hit 1.49 as the peak, but under stress testing it climbs to 1.52V. I've been using this chip for six years with the original settings, recently unlocked and overclocked to 4.9.
G
GioRollins
09-22-2025, 11:09 PM #4

I've noticed in the overclocking scene that voltage remains relevant until temperatures stay within limits. The Ivy Bridge design supports a maximum of 105V and 1.52A as per Intel guidelines. My setup won't work at 1.49V continuously due to offset OC and C1E being active. During gameplay it could hit 1.49 as the peak, but under stress testing it climbs to 1.52V. I've been using this chip for six years with the original settings, recently unlocked and overclocked to 4.9.

T
TroubleAffeHD
Member
127
09-22-2025, 11:09 PM
#5
Is the 300MHz difference beneficial in games? The voltage is high, but the extra performance gain might not be worth risking your CPU's lifespan. 4.6 is great, though if you need more speed, try using an app like Winaero to temporarily pause unused tasks or upgrade to a better processor.
T
TroubleAffeHD
09-22-2025, 11:09 PM #5

Is the 300MHz difference beneficial in games? The voltage is high, but the extra performance gain might not be worth risking your CPU's lifespan. 4.6 is great, though if you need more speed, try using an app like Winaero to temporarily pause unused tasks or upgrade to a better processor.

C
Cherry_Bell
Member
161
09-22-2025, 11:09 PM
#6
Upgrading to 3770K seems worthwhile, though the used processor costs around 140 dollars. If it drops in price by about 100 dollars, I’d be happy to purchase it. Right now, 2700K and 2600K are priced at 100 dollars or less.
C
Cherry_Bell
09-22-2025, 11:09 PM #6

Upgrading to 3770K seems worthwhile, though the used processor costs around 140 dollars. If it drops in price by about 100 dollars, I’d be happy to purchase it. Right now, 2700K and 2600K are priced at 100 dollars or less.

S
skovbo1801
Member
186
09-22-2025, 11:09 PM
#7
Got it. Just confirming the specs: dual channel with 16GB RAM and Windows/games on an SSD.
S
skovbo1801
09-22-2025, 11:09 PM #7

Got it. Just confirming the specs: dual channel with 16GB RAM and Windows/games on an SSD.

A
Alonzi
Member
66
09-22-2025, 11:10 PM
#8
2600k/2700k could be a good idea. Don't let the perception of being behind hinder you. They all overclock equally, and the gap to third-gen Ivy i7s wouldn't be significant. More threads in games might be worth looking into.
A
Alonzi
09-22-2025, 11:10 PM #8

2600k/2700k could be a good idea. Don't let the perception of being behind hinder you. They all overclock equally, and the gap to third-gen Ivy i7s wouldn't be significant. More threads in games might be worth looking into.

K
Kynedee
Posting Freak
784
09-22-2025, 11:10 PM
#9
I'll wait for the upcoming sale period and possibly choose an 3770K or 2700K/2600K depending on the price. Also, purchasing a Sandy Bridge avoids the trouble of delidding.
K
Kynedee
09-22-2025, 11:10 PM #9

I'll wait for the upcoming sale period and possibly choose an 3770K or 2700K/2600K depending on the price. Also, purchasing a Sandy Bridge avoids the trouble of delidding.

L
LorrenK
Senior Member
703
09-22-2025, 11:10 PM
#10
What type of cooler are you using?
L
LorrenK
09-22-2025, 11:10 PM #10

What type of cooler are you using?

Pages (3): 1 2 3 Next