Connecting wired internet and LAN data transfer between two PCs using a router or hub.
Connecting wired internet and LAN data transfer between two PCs using a router or hub.
I understand your concern. The setup you described shows some inconsistencies. Running a long cable through the house and connecting it to both a router and another router doesn’t quite match the speeds you’re experiencing. Using a hub or router instead could help improve performance and simplify management. Check the router specifications to ensure they support the speeds you need, and consider upgrading if necessary.
Link the Ethernet cable from the basement to the WAN port on the upstairs router. Then link both computers to the upstairs router’s LAN ports. Access the upstairs router’s login and turn off DHCP. Be aware the upstairs router might have a speed cap (100Mbit/s or less), which could cause network slowdown. In that scenario, skip the hub and use a switch instead. Fanless 8-port Gbit switches are affordable, typically under $50, and brands such as D-Link, Netgear/Cisco, TP-Link, and Linksys are common options.
I attempted it anyway, since the router only has LAN ports. I'm checking if turning off DHCP improves speeds—if they stay at 60mbps, I'll consider upgrading to a Switch.