Connecting bridged and unbridged ports to a single switch?
Connecting bridged and unbridged ports to a single switch?
You're exploring how connecting different LAN ports from your modem/router together could affect your network setup. It sounds like you're trying to see what happens when you link the bridged and unbridged ports on the same switch. This could potentially create a more flexible configuration, allowing you to manage devices in various network modes without needing to change cables each time. Just keep in mind that working with such configurations requires careful planning, especially if you're new to networking.
Access the ISP modem's admin portal using its IP address. No direct connection is required. Adding an extra cable isn't advisable.
I think OP is suggesting their router operates on a separate network segment, not using the 192.168.1.x range. This would clarify why they can't reach the ISP device on that address, as that device isn't reachable from their subnet. It seems unlikely traffic would naturally travel back, so it might be due to a changed modem IP or all devices now sharing the same network. Would help to confirm the exact setup.
Ensure the modem remains reachable. If it's set to 192.168.1.254 within the 192.168.1.0/24 network, and your Asus device is at 192.168.2.254 on the same subnet, you should still connect to the modem.
What is the IP address of your modem? Which two subnets are you connected to? The subnet is 192.168.1.0/24.
Modem IP check: Connecting directly via an unbridged port shows 192.168.1.254; otherwise it’s not visible through your ASUS router. Subnets: When using IPCONFIG it lists a subnet mask of 255.255.255.0, but the ASUS WAN page shows 255.255.252.0. The router is set to 192.168.2.1 and the modem defaults to 192.168.1.254.