Connected internet via cable.
Connected internet via cable.
You’re dealing with a few setup challenges here. First, I’m not familiar with optical fiber—you mentioned you have coax already. Second, you’re unsure about your Ethernet setup and whether it’s coaxial or Ethernet-based. If you’re thinking about getting wired internet, there are options like using coax to connect an Ethernet cable directly, but that might not be the simplest path. Regarding RJ45, it’s the connector used for Ethernet cables, and different sizes exist depending on the standard you’re using. Your Xbox’s Ethernet didn’t match your wall port, which suggests a compatibility issue or possibly a mismatch in cable types. Let me know if you’d like clarification on any of these points. Thanks!
I understand your goal, but you're looking to extend Ethernet throughout the entire home using a wired connection. Your existing coax setup is already active, so you can plan accordingly.
Additionally, I believe my home doesn't have a RJ45 port. It might be a different type of connection, such as RJ12 or another form.
Do you want something similar? This product connects your coax line to Ethernet using the service ECB2500C. You place one adapter near each end of your connection. For instance, if your router is in the living room, you'd set up an adapter there and another in the bedroom for the device.
Typical homes usually lack a wired RJ45 connection. Most commonly they use RJ10, RJ11 or RJ12 which are meant for phones. They won’t work for internet unless you’re using dial-up. If you’re unsure about wiring your home, it’s best to avoid the risk and get someone to handle it.
You connect a coaxial cable to your modem and then use an Ethernet cable to link it to your Xbox. You're looking to extend Ethernet to other devices, aren't you? You might run longer cables from your router to those devices for a more affordable setup, or you could consider hiring someone to install it properly.
Yes, you're right. Moca adapters are quite costly, often costing around $160 for a pair. You’re limited to 16 Moca devices on a single network. If they’re connected to the same lines that provide your internet and cable, it should work, but you’ll need to consider things like using a Moca filter. Regarding Ethernet, most homes don’t have it built in. The jacks you see are usually RJ11 for phone use, not data. In some projects, contractors might have used Ethernet instead of phone lines, but you’d need to check the wiring—often there are eight wires visible behind the wall. For speed, Cat5e and Cat6 can handle up to 100 meters at 1 Gbps, while Cat6a supports 10 Gbps over the same distance. I think sticking with Cat6 would be sufficient.