Connect the computer via the multimode fiber extender system to the other room's network.
Connect the computer via the multimode fiber extender system to the other room's network.
I need to relocate your space heater from the office to a spot next to your Dedi server in the kitchen. The space is only about 15 feet apart, with just one wall separating the office from the router/Dedi in the kitchen. The distance is minimal, but signal quality drops quickly over USB at that length. I’ve seen Linus use a $1500 fiber extender with limited USB ports, so I’m looking for a better short-range solution. My requirements include connecting several USB devices—five x5 USB 3.0, four x2 USB 2.0, two HDMI, and two DisplayPort monitors at 60Hz or higher. What options suit this setup?
It really isn't worth it, especially for a low cost. This approach usually wastes a lot of money and time. I don’t suggest it because tearing down walls, running cables, testing, and trying to get the right equipment can be much more expensive than just finding a better way to release the heat from the room.
The main challenge will be locating 5 meter display port cables. Once that's covered... - if the HDMI displays aren't high resolution, you can purchase standard 5 meter HDMI cables. - USB connections should work, though you might need a hub to boost the signal. You could simply place a powered USB hub on your desk and that should suffice.
The problem lies with the powered hub not stretching enough, and USB extenders will render it ineffective. My Dell D6000 faces this exact challenge.
The idea of placing a hub in between to strengthen the signal isn't necessarily an issue. In fact, I'm using this configuration on my own machine.
Consider integrating a powered hub first, then expand further. What are those fiber extenders for? They aren't a simple aperture science device in a container—they're a powered hub at each end that communicates using methods other than traditional copper connections.