Connect powerstrips in a chain and use extension cords for longer reach.
Connect powerstrips in a chain and use extension cords for longer reach.
I purchased a smart power strip that tracks electricity consumption and includes a timer. It’s convenient because it lacks sufficient outlets, making daisy chaining essential. The model from Helo supports up to 16A and 3680W. Based on Google searches, a typical base station uses about 2 watts per bulb, each light bulb drawing 5 or 4 watts, while the main hub consumes around 3 watts. On the other hand, my Wi-Fi router draws roughly 6 watts. If accurate, the total would be approximately 23.8 watts. What I need is to connect this smart strip directly to the wall, add another power strip to the Helo smart one (the second one isn’t smart), and use extension cords from the base station to the second strip. I’ve created a professional diagram of the setup and tried to clarify everything. Feel free to ask if anything is unclear. Since you’re in the EU, that’s noted. EDIT – here’s a link to the Helo power strip on EU strong.tv: https://www.eustrong.tv/products/helo-power-4-eu
The 16A and 3680W specification mainly applies to the power strip itself. The plug and cable connected to it can handle 16A, and each socket is rated for that amount. The 3680W comes from a 230V supply at 16A, which equals 3680 watts. Keep in mind that actual mains voltage may vary by a few percent. The rating applies only to the power strip. The AC outlet where you connect the strip might route cables through the electrical panel, potentially limiting it to 15A or even 10A. The limiting factor is usually the weakest component in the circuit. You can add another power strip to the helo model, but it won’t affect performance as long as total power usage stays within limits.
Many unproven views suggest avoiding chaining power strips due to the presence of multiple fuses or breakers. You might discover cheaper cables instead of power strips, and at those low-wattage levels, even inexpensive options work well.
I understand your feedback. This setup isn’t something I’ve encountered before. It seems to differ from the power strips I’ve seen, especially since there’s no equivalent Y splitter meeting EU standards available. Maybe it’s designed for a different region or use case?
Sure, I'll rephrase that for you. I plan to check what happens and keep a close eye on things. I'll look at some forums where people shared their experiences with power strips burning due to daisy chaining. However, they didn't mention how many watts were being drawn. I'm hoping to ask here to get more details about my situation, so thank you for your help!