Configuration won't start once DOCP is activated.
Configuration won't start once DOCP is activated.
Hello, I see you're facing some issues with your new setup. After installing the Ryzen 9 7950X, Asus Prime X670-P Wi-Fi board, and the memory from the provided link, your system is booting but not displaying anything on the screen. The power LED lights up and fans spin, yet no output appears whether connected to the GPU or motherboard. You've tried resetting the BIOS, re-seating the CMOS battery, and using Asus' flash drive tool, but still no results. Could you share more details about your setup or any error messages you're seeing?
Ryzen 7000 includes AMD's initial DDR5 controller, which can cause problems with four RAM sticks. Have you attempted removing two sticks and using DOCP with 64GB? Otherwise, give it a try.
Great advice received. I’ll retry the process and consider RMA as a backup. Thanks for the support!
Noted, I adjusted my drive to use exFAT for BIOS recovery. I’ll do it right this evening.
Everything didn’t go as planned. Because it was just bought, I was able to return it. I won’t bother with the DOCP anymore; boosting memory speed isn’t that crucial, and storage capacity is what matters most. Sorry for a lackluster outcome.