Concerns about voltage levels in the 3900X system
Concerns about voltage levels in the 3900X system
It seems you're currently using the active setting. I'll likely switch to the high-performance version later. This decision came after installing the chipset driver, before updating the BIOS.
the processors haven't been operating long enough to confirm the voltage is secure. If I had a weapon to my head, I'd say it's not safe. Anything above 1.3v under full load causes damage to the CPU, with some reports showing degradation after just 1.3v+ across all cores. A 1.3v+ situation leads to noticeable wear within months—my old 2600k took years to show similar signs. An a -0.05 offset provides a safe and efficient method to protect your CPU while keeping performance intact.
You're all set. It's running at 1.50v, which is a bit unexpected. I'm checking if the LLC is set to auto and increasing the voltage if needed.
The LLC configurations assist in minimizing v-droop during loads where the v-core slightly reduces, leading to instability. To maintain stability, it's increased at specific points. This means Mode 8 would be very over-volting. I'd likely begin around Mode 5 or 6, adjusting manually.