F5F Stay Refreshed Power Users Overclocking Concerned about Intel Extreme Tuning, i5 4690k (first time user)

Concerned about Intel Extreme Tuning, i5 4690k (first time user)

Concerned about Intel Extreme Tuning, i5 4690k (first time user)

D
Drayden_
Member
181
09-09-2016, 03:21 AM
#1
I recently assembled my second machine and was eager to push it overclocked. I did some quick research and wanted to better grasp my CPU before making changes. I’m a bit anxious about my current overclock settings, so I’d appreciate some guidance or reassurance. Below are the details of my setup: http://imgur.com/0CXBduO. I tested a stress test with prime95 for about 30 minutes, reaching temperatures averaging around 70-74 degrees (with a peak of about 80 for a short time). I also checked game performance, which peaked at a similar temperature. She also idles around 30 degrees or higher. Are there any settings in the picture that could be problematic? Also, what should I consider with my power management—currently set to power saver mode? Thanks for your time.
D
Drayden_
09-09-2016, 03:21 AM #1

I recently assembled my second machine and was eager to push it overclocked. I did some quick research and wanted to better grasp my CPU before making changes. I’m a bit anxious about my current overclock settings, so I’d appreciate some guidance or reassurance. Below are the details of my setup: http://imgur.com/0CXBduO. I tested a stress test with prime95 for about 30 minutes, reaching temperatures averaging around 70-74 degrees (with a peak of about 80 for a short time). I also checked game performance, which peaked at a similar temperature. She also idles around 30 degrees or higher. Are there any settings in the picture that could be problematic? Also, what should I consider with my power management—currently set to power saver mode? Thanks for your time.

M
MRL_0121
Junior Member
16
09-14-2016, 09:45 PM
#2
Probably more advantageous to use the BIOS, as it seems your system is at 4.1 and 1.2, which is high for a minimal overclock. Many software tools tend to overvolt and don't deliver the performance you'd get by adjusting the BIOS.
M
MRL_0121
09-14-2016, 09:45 PM #2

Probably more advantageous to use the BIOS, as it seems your system is at 4.1 and 1.2, which is high for a minimal overclock. Many software tools tend to overvolt and don't deliver the performance you'd get by adjusting the BIOS.

A
Alex__Pro
Member
51
09-14-2016, 11:37 PM
#3
I would verify the memory multiplier at 14x
Do you have 1400MHz memory?
:3
A
Alex__Pro
09-14-2016, 11:37 PM #3

I would verify the memory multiplier at 14x
Do you have 1400MHz memory?
:3

G
GMB_01
Member
231
09-15-2016, 12:17 AM
#4
Probably more advantageous to use the BIOS, as it seems your system is at 4.1 and 1.2, which is high for a minimal overclock. Many software tools tend to overvolt and don't deliver the performance you'd get by adjusting the BIOS.
G
GMB_01
09-15-2016, 12:17 AM #4

Probably more advantageous to use the BIOS, as it seems your system is at 4.1 and 1.2, which is high for a minimal overclock. Many software tools tend to overvolt and don't deliver the performance you'd get by adjusting the BIOS.

S
Surdaniel
Member
55
09-15-2016, 01:13 AM
#5
Tradesman1 is spot on.
Using the BIOS for overclocking also lets you manage power-saving options, though some settings might hurt the performance. It also helps ensure system stability because the overclock is set to start up instead of after the OS boots.
S
Surdaniel
09-15-2016, 01:13 AM #5

Tradesman1 is spot on.
Using the BIOS for overclocking also lets you manage power-saving options, though some settings might hurt the performance. It also helps ensure system stability because the overclock is set to start up instead of after the OS boots.

D
derk4321
Senior Member
482
09-22-2016, 08:21 AM
#6
It seems like you might be better off using the BIOS instead. It looks like your current version is 4.1 and 1.2, which might be too high for a minimal overclock. Most software OC tools tend to overvolt and don't give you the performance you'd get from BIOS settings. Thanks for the advice. I wasn't as sure about doing it via BIOS because there were many confusing menus, but I'll try again when I get back. I need to learn how to reset it back to the default clock.
D
derk4321
09-22-2016, 08:21 AM #6

It seems like you might be better off using the BIOS instead. It looks like your current version is 4.1 and 1.2, which might be too high for a minimal overclock. Most software OC tools tend to overvolt and don't give you the performance you'd get from BIOS settings. Thanks for the advice. I wasn't as sure about doing it via BIOS because there were many confusing menus, but I'll try again when I get back. I need to learn how to reset it back to the default clock.

K
koen_frank
Member
72
10-12-2016, 01:59 AM
#7
I would look into that memory multiplier on 14x
Do you have 1400MHz memory?
I have an 8gb HyperX 1866MHz
K
koen_frank
10-12-2016, 01:59 AM #7

I would look into that memory multiplier on 14x
Do you have 1400MHz memory?
I have an 8gb HyperX 1866MHz

D
Damien1019
Member
185
10-17-2016, 03:04 PM
#8
Tradesman1 shared their experience about resetting settings and encountering issues with BIOS access. They described the keyboard being plugged in as unusual and sought advice on voltage, multiplier settings, and other adjustments. They also mentioned experiencing higher temperatures at regular speeds. The user provided links for reference.
D
Damien1019
10-17-2016, 03:04 PM #8

Tradesman1 shared their experience about resetting settings and encountering issues with BIOS access. They described the keyboard being plugged in as unusual and sought advice on voltage, multiplier settings, and other adjustments. They also mentioned experiencing higher temperatures at regular speeds. The user provided links for reference.