Compatibility ram for GIGABYTE X570 AORUS PRO WiFi, 3800x

F5F Stay Refreshed Hardware Desktop Compatibility ram for GIGABYTE X570 AORUS PRO WiFi, 3800x

Ward12
Posting Freak

895

10-14-2019, 02:02 AM

Installed a set of 2x 16GB Trident Z Neo DDR4-3600MHz CL16-19-19-39 modules and am feeling let down. The XMP profile doesn’t boot, so I changed settings manually but got stuck at 3333MHz, which is the highest supported by the latest BIOS. Thinking about sending them back for Corsair Vengeance RGB, but it’s hard to find a comparable product. It’s unclear if this is typical performance or indicative of poor quality.

Ward12

10-14-2019, 02:02 AM #1

rayatron
Junior Member

10-14-2019, 07:44 PM

activate xmp protocol and adjust dram voltage to 1.35. if issues persist, raise voltage gradually in increments of 0.01 up to 1.45v. ensure ram is installed in slots 2 and 4.

rayatron

10-14-2019, 07:44 PM #2

activate xmp protocol and adjust dram voltage to 1.35. if issues persist, raise voltage gradually in increments of 0.01 up to 1.45v. ensure ram is installed in slots 2 and 4.

LEPticon
Junior Member

10-15-2019, 12:35 AM

I just encountered the same issue on another Gigabyte board. The auto mode was attempting to operate my 3600MHz chip at around 1.2 volts, but adjusting it to 1.35v resolved both startup problems and stability concerns.

LEPticon

10-15-2019, 12:35 AM #3

Kush_PotHead
Member

125

10-15-2019, 01:49 AM

Changing to slots 2 and 4 resolved the issue. It hasn't happened before, so I'm grateful.

Kush_PotHead

10-15-2019, 01:49 AM #4

Changing to slots 2 and 4 resolved the issue. It hasn't happened before, so I'm grateful.