F5F Stay Refreshed Power Users Networks Comparing fibre channel and Ethernet, compatibility depends on your setup.

Comparing fibre channel and Ethernet, compatibility depends on your setup.

Comparing fibre channel and Ethernet, compatibility depends on your setup.

R
RizapS
Member
Find
135
05-13-2016, 05:55 AM
#1
I have some SFP+ 10/25Gbe cards from a server. While researching, I saw they’re also referred to as fibre channel cards. As I dug deeper, I’m unsure if my plan will work or if there are any issues. The cards I own are a QLogic MSIP-REM-QLG-AH2010410 model. My goal is to connect one of these to a pfSense device via a cable and link multiple devices using standard RJ45 Ethernet. Am I missing something, or is this setup feasible? (I assume pfSense supports them, but I need confirmation.)
Reply
Reply
R
RizapS
05-13-2016, 05:55 AM #1

I have some SFP+ 10/25Gbe cards from a server. While researching, I saw they’re also referred to as fibre channel cards. As I dug deeper, I’m unsure if my plan will work or if there are any issues. The cards I own are a QLogic MSIP-REM-QLG-AH2010410 model. My goal is to connect one of these to a pfSense device via a cable and link multiple devices using standard RJ45 Ethernet. Am I missing something, or is this setup feasible? (I assume pfSense supports them, but I need confirmation.)

Reply
Reply
R
RiYu_u
Junior Member
Find
26
05-30-2016, 07:56 AM
#2
Fibre Channel operates independently from Ethernet and IP-based networks. It functions as a distinct technology with its own switches and equipment. To connect to it, use a 10GbE SFP+ card and link via Ethernet.
Reply
Reply
R
RiYu_u
05-30-2016, 07:56 AM #2

Fibre Channel operates independently from Ethernet and IP-based networks. It functions as a distinct technology with its own switches and equipment. To connect to it, use a 10GbE SFP+ card and link via Ethernet.

Reply
Reply
S
Sneakyginger8
Senior Member
Find
580
05-30-2016, 09:24 AM
#3
I checked the details and it looks like these cards function as Ethernet instead of fiber channel. The model is a QLogic FastLinQ QL41254HLCU. Appreciate the clarification!
Reply
Reply
S
Sneakyginger8
05-30-2016, 09:24 AM #3

I checked the details and it looks like these cards function as Ethernet instead of fiber channel. The model is a QLogic FastLinQ QL41254HLCU. Appreciate the clarification!

Reply
Reply
K
KillaTron100
Member
Find
166
05-30-2016, 02:40 PM
#4
PFSense may require specific network cards, since not all products come with a free installation drive on FreeBSD.
Reply
Reply
K
KillaTron100
05-30-2016, 02:40 PM #4

PFSense may require specific network cards, since not all products come with a free installation drive on FreeBSD.

Reply
Reply
F
fluffypuppy576
Member
Find
126
06-04-2016, 07:55 AM
#5
finally resolved the issue. if_qlnxe_load="YES" must be set in /boot/loader.conf (use 'ee /boot/loader.conf') and reboot. ensure pfSense version 2.6.0 or higher is installed. they aren't visible on the console, only accessible via the web interface! i might have spent too much time doubting it before considering a check of the web settings.
Reply
Reply
F
fluffypuppy576
06-04-2016, 07:55 AM #5

finally resolved the issue. if_qlnxe_load="YES" must be set in /boot/loader.conf (use 'ee /boot/loader.conf') and reboot. ensure pfSense version 2.6.0 or higher is installed. they aren't visible on the console, only accessible via the web interface! i might have spent too much time doubting it before considering a check of the web settings.

Reply
Reply