Compare ASUS Prime B460M-A and B460M-A R2.0 models for performance and features.
Compare ASUS Prime B460M-A and B460M-A R2.0 models for performance and features.
Hello everyone. I'm considering purchasing one of these two boards and would appreciate some guidance. Both were initially seen as low-quality, but I need help deciding which offers better performance. I'm from Malaysia and only these two fit my requirements. Please take a look before I decide, otherwise I might base the choice on general expectations. Key points: *No overclocking. *95TDP CPU at full load. *Heavy gaming for long sessions, but no case or open bench. *I'll use stock coolers or blowdown coolers for VRM cooling. Regarding the boards – the one with the heatsink might look better, but I should read further.* - The B460M-A includes a heatsink, while the other doesn't. - R2.0 models generally have more MOSFETs (around 20) compared to non-R2.0 (13), which could mean lower heat per device and possibly better current distribution. - The non-R2.0 boards still offer four channels, so they should work well even if the VRM is a bit less efficient. In terms of VRM and power delivery, the R2.0 seems to provide more robust cooling and higher efficiency, especially for sustained heavy use. Unless you're certain about the heatsink impact, I'd lean toward the R2.0 for better reliability and performance. Thanks ahead!
Avoid spending your budget on a K CPU unless you actually overclock it; you won’t hit the top speeds of a 10400F. You might want to look for a pro VDH or DS3H since regular boards aren’t very reliable.
I'm not addressing your query directly. I'll proceed with a clearer approach. The K CPU is likely being used at a lower cost, which may be more practical for me. Pro VDH and DS3H seem costly, but their advantages aren't clear to me. Prime boards are problematic—what makes them unsuitable?
Prime boards really lack good VRMs. It might be worth considering a B560 DS3H or Pro VDH since they offer better VRM options and support higher RAM speeds compared to the B460, which caps at 2666MHz—slow by today's standards.
The i3-10105 is included with the R2.0. Non-R2.0 models require a BIOS upgrade and an older 10th generation processor.
Trash? Are you certain about that? Can you clarify your reasoning? From what I see (still a beginner), the DSH3 models all share the same power phase count—MOSFETs, chokes, and capacitors are similar. Yet they remain pricier. Regarding RAM, I’m sticking with 10th gen i3/i5; both were capped at 2666 MHz, so that’s fine. As for the motherboard, it’s significantly more costly. Prices vary by country, unless you find a good deal or promotion—this is why Prime boards are cheaper, otherwise they’re also expensive. *Sorry for my unclear English. I hope this makes sense.*
Thanks for the update. I’d like to confirm which models offer superior VRM performance. *If you’re confident in your knowledge,* feel free to suggest the ones with the best VRM design.