F5F Stay Refreshed Hardware Desktop Choosing a new motherboard decision Dilemma over upgrading your system

Choosing a new motherboard decision Dilemma over upgrading your system

Choosing a new motherboard decision Dilemma over upgrading your system

K
KawwaiiPlaysMC
Junior Member
20
12-18-2019, 11:03 AM
#1
Addressing the Q-Fan feedback, I might need to swap out the motherboard. Due to budget constraints, replacing it with an AM4 and DDR4 setup seems feasible. Any recommendations for suitable boards would be appreciated. Current system: Case is quiet! Dark Base Pro 900 Rev. 2 with Asus Strix X50 – E Gaming CPU, AMD Ryzen 7 3700X, GSKill F4 3200 and two 16GB CPU fans. Power supply is a solid 750W with quiet operation. Dark Rock Pro 4, Power 750W, all running smoothly.
K
KawwaiiPlaysMC
12-18-2019, 11:03 AM #1

Addressing the Q-Fan feedback, I might need to swap out the motherboard. Due to budget constraints, replacing it with an AM4 and DDR4 setup seems feasible. Any recommendations for suitable boards would be appreciated. Current system: Case is quiet! Dark Base Pro 900 Rev. 2 with Asus Strix X50 – E Gaming CPU, AMD Ryzen 7 3700X, GSKill F4 3200 and two 16GB CPU fans. Power supply is a solid 750W with quiet operation. Dark Rock Pro 4, Power 750W, all running smoothly.

D
dubdub112
Member
202
12-18-2019, 01:01 PM
#2
Update the BIOS first using a reliable method—transfer the file onto a USB drive. Avoid updating via the internet or within Windows, as it increases the risk of errors. Remember to download the newest BIOS version for your PC or another device, unzip it, and copy only the necessary file (XXXX.CAP) to the USB. Your upgraded motherboard may support a USB BIOS Flashback feature, allowing recovery even after corruption.
D
dubdub112
12-18-2019, 01:01 PM #2

Update the BIOS first using a reliable method—transfer the file onto a USB drive. Avoid updating via the internet or within Windows, as it increases the risk of errors. Remember to download the newest BIOS version for your PC or another device, unzip it, and copy only the necessary file (XXXX.CAP) to the USB. Your upgraded motherboard may support a USB BIOS Flashback feature, allowing recovery even after corruption.

G
Greytrem
Junior Member
41
12-18-2019, 05:20 PM
#3
Unless I'm missing something.., if your board can't adjust the fan speeds, wouldn't it be a lot cheaper to buy a fan controller? Yeah, so long as it isn't ancient, but I'd avoid paying a lot for anything on AM4 at this point.
G
Greytrem
12-18-2019, 05:20 PM #3

Unless I'm missing something.., if your board can't adjust the fan speeds, wouldn't it be a lot cheaper to buy a fan controller? Yeah, so long as it isn't ancient, but I'd avoid paying a lot for anything on AM4 at this point.

B
blondeminion
Senior Member
594
12-19-2019, 07:45 AM
#4
You can update to the latest 5001 BIOS versions directly. Intermittent versions are not required. The Asus BIOS page advises renaming the BIOS file (SX570EG.CAP) with BIOSRenamer before using it.
B
blondeminion
12-19-2019, 07:45 AM #4

You can update to the latest 5001 BIOS versions directly. Intermittent versions are not required. The Asus BIOS page advises renaming the BIOS file (SX570EG.CAP) with BIOSRenamer before using it.

T
Tuetme
Senior Member
418
12-19-2019, 04:31 PM
#5
You can proceed directly to 5001. If you're not employing the USB BIOS Flashback technique (such as inserting the USB drive and updating via BIOS), you won't need to rename it. For USB BIOS Flashback, the motherboard operates in bare-minimum "headless" mode, so renaming is necessary. The XXXX.CAP holds the BIOS image. You don't require the BIOSRenamer tool—it's essentially the same as right-clicking, selecting Rename, and entering "SX570EG"
T
Tuetme
12-19-2019, 04:31 PM #5

You can proceed directly to 5001. If you're not employing the USB BIOS Flashback technique (such as inserting the USB drive and updating via BIOS), you won't need to rename it. For USB BIOS Flashback, the motherboard operates in bare-minimum "headless" mode, so renaming is necessary. The XXXX.CAP holds the BIOS image. You don't require the BIOSRenamer tool—it's essentially the same as right-clicking, selecting Rename, and entering "SX570EG"

S
styytyttyy
Junior Member
9
12-20-2019, 11:40 AM
#6
The key Retail and licensed should generally remain valid even after replacing the motherboard, as hardware compatibility is typically maintained by Microsoft.
S
styytyttyy
12-20-2019, 11:40 AM #6

The key Retail and licensed should generally remain valid even after replacing the motherboard, as hardware compatibility is typically maintained by Microsoft.