Choose a switch for your concepts
Choose a switch for your concepts
Based on your setup and future upgrades, let's review the best switch options for your situation. I've organized the information to clarify your needs.
Your current layout includes: basement, ground floor, bedrooms floor, attic. You have a single fiber connection from the first floor to the network hardware in the basement. Your equipment list features multiple PoE devices and a camera system.
For your timeline, you're planning to add fiber extensions to the basement and possibly upgrade to different models. Here are some considerations:
- **Current PoE requirements**: With three PoE ports already in use (16W each), you have a solid foundation.
- **Future upgrades**: If you decide to switch to a new model or need more capacity, ensure the new switch supports at least 20W per port for your intercom and camera needs.
- **Compatibility**: Verify that any new switch you choose aligns with IEEE 802.3af standards (PoE 9.5W) or can accommodate higher power if needed.
Given these points, you may want to:
1. Select a switch with at least 20W per port for PoE devices.
2. Confirm the model supports the expected load after additions.
3. Check availability and compatibility with your existing fiber setup.
Let me know if you'd like help narrowing down specific models!
Best regards,
[Your Name]
Unfortunately, the device has many PoE ports but ultimately fails due to a power issue. With a total power budget of 130 watts and 15.4 watts required per port, using 9 ports exceeds the limit.
Consider the Netgear GS724TPv2 priced around $110 with shipping included. It features 24 RJ45 ports supporting POE+, a total power draw of 190 watts, and two 1Gbps SFP ports. An alternative is the Juniper EX4200 offering 48 ports at 1Gbps, with 8 ports providing up to 15.4W per port (total 130W). It includes two 10Gbps uplink ports and two power supplies of 320W each, costing about $140 plus shipping. Additional options are listed with varying specifications and prices across different sellers.
I don't reside in the USA, so the Juniper 4200-24 PX costs $900 in my country—it's quite pricey. Checking the GS724TPv2 documentation at https://www.downloads.netgear.com/files/..._IG_EN.pdf, it specifies Cat 5e. The latest version supports Cat6 cables with a maximum of 10Gbps. Another option is the GS324TP model from Netgear at https://www.netgear.com/business/wired/s...rt/gs324tp. Let me know if you need further details.
this device supports up to 1 gigabit per second on RJ45 connections. cat5e works well for 1 gbps and even higher speeds, though the standard likely existed before 2.5 gbps was defined, meaning ports are actually limited to 1 gbps. you can use any cat5e or better cable such as cat6 or cat6a, but each port will still deliver 1 gbps.