Choose a budget-friendly M.2 slot for your Ryzen 2200G.
Choose a budget-friendly M.2 slot for your Ryzen 2200G.
They can utilize 16 pci-e lanes, but overall speed stays close to what an PCI-E x8 provides. In short, consider this: PCI-E x8 delivers up to 7.5 GB/s across eight channels, while a video card can push more—around 9 GB/s. On PCI-E x16 you'd spread that 9 GB evenly over 16 lanes, but the bottleneck remains similar. Losing just a few gigabits won’t visibly affect performance, frame rate, or lag. In practice, you’ll see less than a 1-2% drop. With today’s powerful cards, the real issue is the limited cores and lack of hyperthreading. Even with a 2200G GPU, overclocking it won’t help much—performance loss will be minimal. Prioritize chips with more cores and hyperthreading instead.
I need more than what’s available right now. I’m thinking about boosting the performance because I’ll be using this CPU for a long time. The prices here are high, so I’m looking to upgrade from my Intel i7 3517U to an Intel HD4000. Maybe later I’ll add a dedicated GPU like an RX570 if I need more power for tasks such as streaming or editing. Thanks for your advice!
The AE is the original 1600 model. AF is a newer version similar to a 2600 with memory controller from around 1600. You'll find performance close to 2600 at a lower price. Consider a 1400 if you want hyperthreading (4 cores, 8 threads). The used market on sites like Amazon or eBay often has high customs charges and stolen packages.
The used market isn't very reliable. Prices stay close to what they were originally. It's nearly impossible to locate fairly new components like this because few people buy them. Shipping fees are also quite high and substantial. On eBay, especially in Brazil, it's almost nonexistent for PC parts as most sellers use other platforms at prices near the retail level.
Most doesnt mean all, it just means one should recommend boards that have good VRMs. Also x470 isnt impressive at all when it comes to low end models. Ill take number of the 4ghz wall people have met since day 1 to this day. Just lf note, if you are overclocking the iGPU on the 2200Gm the Pro4 and AC would be better options than the VDH. Also the board are fully capable of handling higher end offerings like the 3900x and 2700x (powerdraw wise) at stock providing you habe some airflow over the VRM heatsinks. Either from an aircooler or dedicated fan
The board B350 might not come with a BIOS that supports the 2200g. A solid motherboard is important; it's smart to invest a bit more for better upgrade options later. B450 models are essentially the lowest tier, lacking features and being inexpensive. Because of their low cost, you might end up spending less than expected. It’s better to save up and purchase quality hardware. Many people make the error of choosing a motherboard that locks them into a specific processor, only to face issues when the BIOS doesn’t match their chip. At least opt for a B450, but I believe you should have at least an X470 or X570. The latter could be more affordable depending on your budget, so I recommended the X470.
Hey, you're right!! I digress from this thread, give your advice, don't respond to this post.
I’m doing well despite the 2200G's base CPU and APU speeds. The processor I’m using right now only reaches about 3.0GHz most of the time, often around 2.4GHz. I don’t think it’s necessary to mention the Intel HD4000 for gaming; the B450M seems like the best option since anything above that and with such prices just becomes expensive (around R$700 for a single PCI-E slot, currency conversion noted).