F5F Stay Refreshed Hardware Desktop Checking RAM OC settings and crashing Karhu gameplay

Checking RAM OC settings and crashing Karhu gameplay

Checking RAM OC settings and crashing Karhu gameplay

Pages (2): 1 2 Next
T
tomskos221
Member
120
10-02-2019, 09:31 AM
#1
My setup includes a Ryzen 3800x (the retailer didn’t have any more 3700x...), an Aorus x570 Master, 32GB TridentZ Neo 3600 CL16, and an EVGA 2080XC. There’s no CPU overclocking possible. I can’t achieve a stable XMP setting. Raising the voltage slightly helped, pushing it to just under 1000% in Karhu after several adjustments, reaching around 1.37v. At that point, every test causes the system to crash and restart. I’ve pushed it beyond 9000% without any overclock, so I suspect the RAM is fine. Is this normal behavior or should there be signs of trouble? I’ve used a DRAM calculator before but never got consistent results. The BIOS was updated today, so I might redo that process. Thanks.
T
tomskos221
10-02-2019, 09:31 AM #1

My setup includes a Ryzen 3800x (the retailer didn’t have any more 3700x...), an Aorus x570 Master, 32GB TridentZ Neo 3600 CL16, and an EVGA 2080XC. There’s no CPU overclocking possible. I can’t achieve a stable XMP setting. Raising the voltage slightly helped, pushing it to just under 1000% in Karhu after several adjustments, reaching around 1.37v. At that point, every test causes the system to crash and restart. I’ve pushed it beyond 9000% without any overclock, so I suspect the RAM is fine. Is this normal behavior or should there be signs of trouble? I’ve used a DRAM calculator before but never got consistent results. The BIOS was updated today, so I might redo that process. Thanks.

I
iRaine
Posting Freak
800
10-07-2019, 12:41 AM
#2
You're asking about boosting the RAM speed, whether it's reaching its rated frequency or going higher. You also want to know if it's a 4x8 or 16x2 configuration and what "kharu" means. The mention of Swedish sneakers seems unrelated.
I
iRaine
10-07-2019, 12:41 AM #2

You're asking about boosting the RAM speed, whether it's reaching its rated frequency or going higher. You also want to know if it's a 4x8 or 16x2 configuration and what "kharu" means. The mention of Swedish sneakers seems unrelated.

X
Xatticur
Junior Member
19
10-08-2019, 03:06 AM
#3
Consider using 3200mhz instead.
X
Xatticur
10-08-2019, 03:06 AM #3

Consider using 3200mhz instead.

B
BJcontrollers
Junior Member
5
10-14-2019, 07:00 PM
#4
XMP is being configured. Karhu is a RAM stability testing tool. My setup is 16 x 2,340 or the 3,200 option. If I achieve 3,200 with tighter timing, the variation should be minimal.
B
BJcontrollers
10-14-2019, 07:00 PM #4

XMP is being configured. Karhu is a RAM stability testing tool. My setup is 16 x 2,340 or the 3,200 option. If I achieve 3,200 with tighter timing, the variation should be minimal.

F
Faboboro
Member
74
10-21-2019, 09:29 AM
#5
This tool isn't commonly utilized since it offers limited value when just turning on XMP, and it comes with a cost.
F
Faboboro
10-21-2019, 09:29 AM #5

This tool isn't commonly utilized since it offers limited value when just turning on XMP, and it comes with a cost.

C
CzarnyJakup
Member
224
10-21-2019, 12:08 PM
#6
Adjust the SOC to 1.1 and DRAM to 1.35, then test at 3200 MHz using XMP/DOCP, verify stability. If stable, proceed to 3600 MHz with the same settings and confirm stability again.
C
CzarnyJakup
10-21-2019, 12:08 PM #6

Adjust the SOC to 1.1 and DRAM to 1.35, then test at 3200 MHz using XMP/DOCP, verify stability. If stable, proceed to 3600 MHz with the same settings and confirm stability again.

B
BrandoMex
Member
58
10-23-2019, 04:30 AM
#7
Hello there. Have you tried using HWiNFO for voltage checks? Which RAM model are you using? Also, could you share the timing details with ZenTimings? Here’s the link you mentioned: https://www.overclock.net/forum/13-amd-g...st28555146
B
BrandoMex
10-23-2019, 04:30 AM #7

Hello there. Have you tried using HWiNFO for voltage checks? Which RAM model are you using? Also, could you share the timing details with ZenTimings? Here’s the link you mentioned: https://www.overclock.net/forum/13-amd-g...st28555146

R
Romppanen_
Member
202
10-25-2019, 08:30 AM
#8
Based on other users' advice, I adjusted the settings to 3200 and set the SOC to 1.1 volts. I included a photo of the hardware info and centering details. I ran Karhu overnight at 15132% without any issues. This afternoon I restarted it again. The FAQ on the Karhu site shows over 6400% as 99.41% confidence, which is more than double my estimate.
R
Romppanen_
10-25-2019, 08:30 AM #8

Based on other users' advice, I adjusted the settings to 3200 and set the SOC to 1.1 volts. I included a photo of the hardware info and centering details. I ran Karhu overnight at 15132% without any issues. This afternoon I restarted it again. The FAQ on the Karhu site shows over 6400% as 99.41% confidence, which is more than double my estimate.

M
Martienez123
Member
52
11-08-2019, 03:28 PM
#9
Are there no RAM-related power cycles? Do you have the Load Line Calibration configured for your CPU and SOC?
M
Martienez123
11-08-2019, 03:28 PM #9

Are there no RAM-related power cycles? Do you have the Load Line Calibration configured for your CPU and SOC?

B
birdazoid
Junior Member
40
11-16-2019, 12:45 PM
#10
It's the board. Like a system reset just happened... After noticing this problem repeatedly in the forum over time, I've reached the conclusion that replacing the warranty would resolve the issue. However, I've also seen some AMD chips shipped with RMA requests for similar problems. The simplest testing approach would be swapping in another identical chip of matching wattage to compare performance or see if the store where you bought it can swap it at the counter if needed. You can also refer to your forum discussions when speaking with technical support. More details help. Unless the power supply suddenly stops working and then restarts, it might point to memory controller issues. Another possibility is considering an RMA for the CPU.
B
birdazoid
11-16-2019, 12:45 PM #10

It's the board. Like a system reset just happened... After noticing this problem repeatedly in the forum over time, I've reached the conclusion that replacing the warranty would resolve the issue. However, I've also seen some AMD chips shipped with RMA requests for similar problems. The simplest testing approach would be swapping in another identical chip of matching wattage to compare performance or see if the store where you bought it can swap it at the counter if needed. You can also refer to your forum discussions when speaking with technical support. More details help. Unless the power supply suddenly stops working and then restarts, it might point to memory controller issues. Another possibility is considering an RMA for the CPU.

Pages (2): 1 2 Next