Check your system's limits before adjusting voltage.
Check your system's limits before adjusting voltage.
I reviewed the JayzTwoCents video and noticed he was worried about damaging his chip by pushing it to 1.501V. I own a different setup with a 4670k in an Asrock Z87E-ITX, and I’m new to overclocking. I’m checking if my current settings are safe. My test showed stable performance for about ten minutes using AIDA64 stability checks, with temperatures staying between 80–82°C. This range seems within limits, but I want to confirm the safe fixed voltage and core voltage range.
You're just starting out with overclocking, aren't you? It makes sense to try lowering the voltage, as some people have achieved stable results around 4.8GHz with lower voltages. A few discussions mention 4.3GHz at 1.2V being reliable for certain setups.
You're looking to switch from a fixed voltage to a small offset of around 0.1. I'll help you evaluate the impact on stability. Just let me know what kind of system you're working with and any specific requirements!
No, it's not inherently bad. The default setting is just how it's configured.
To achieve optimal results, you should lower the voltage significantly while keeping stability in mind. Lower voltages also improve thermal performance.
Make sure stability holds, slightly reduce the voltage, keep repeating until it fails, then apply the final stable setting. You can also tweak the ratio a bit higher if needed.