Check your motherboard's compatibility with RAID 0 configurations.
Check your motherboard's compatibility with RAID 0 configurations.
Your idea is feasible with the A78-E35 motherboard. You can install two Samsung SSDs and configure them in RAID 0 for improved speed. Follow your motherboard’s manual to locate the RAID controller settings and ensure you have the correct slots and drivers installed.
Do you already have an SSD or are you moving to RAID 0 SSDs? For starting programs, one SSD is sufficient. My advice against it comes from the fact that it could potentially halve your data safety, as losing a single drive would erase everything on the array. It depends on you whether you're comfortable with that risk. Configuring RAID involves different chipsets and BIOS versions. If you have your motherboard manual, reviewing it is a good idea—it usually contains setup guidance. You typically need to switch the SATA controller to RAID mode (not IDE or AHCI), then restart and enter the RAID boot menu. For Intel chipsets, Ctrl + I is common, though this might vary for AMD. If you lack the manual, you can find it at http://us.msi.com/product/motherboard/su...own-manual. It might also prompt Ctrl + F after enabling RAID, but this is specific to ASRock documentation. When configuring the array, you'll usually be asked to choose a stripe size; 64KB is generally recommended as it balances performance well. Keep in mind that booting from the RAID setup may slightly increase startup time compared to a single SSD, since both the controller and array need to initialize.
I'm preparing for my refund on the broken Kingston V300 480GB SSD and expecting two Samsung 250GB SSDs. It seems life involves some risks, right? I plan to store my programs, operating system, and the SSDs along with important files on my NAS or a 1TB HDD. Thanks a lot! That means a lot. I'll save this information in a Word document for future reference.
Check your boot sequence and ensure the RAID controller is properly recognized. Verify drivers are up to date and try resetting the system if needed.
During startup, you usually see text indicating the RAID controller is initializing. A boot menu with a shortcut to the RAID setup might appear. If not, you can try pressing different F keys during boot (like F1, F2, etc.). Reaching out to MSI support could help, though it may take time.
Ensure ROM mode is activated for the RIAD controller during setup before using the key combination.