F5F Stay Refreshed Hardware Desktop Check the settings menu and look for options to modify your profile information.

Check the settings menu and look for options to modify your profile information.

Check the settings menu and look for options to modify your profile information.

E
Endo42
Junior Member
19
02-04-2022, 05:21 PM
#1
You have an Asrock B650M Pro RS and you're having trouble updating it. The USB drive didn't detect the image, so check your connection and try a different USB port or cable. Make sure the drive is properly seated and that you're using the correct BIOS settings for your system.
E
Endo42
02-04-2022, 05:21 PM #1

You have an Asrock B650M Pro RS and you're having trouble updating it. The USB drive didn't detect the image, so check your connection and try a different USB port or cable. Make sure the drive is properly seated and that you're using the correct BIOS settings for your system.

G
Godoh9000
Junior Member
33
02-04-2022, 08:51 PM
#2
No, I did not format the drive as FAT32.
G
Godoh9000
02-04-2022, 08:51 PM #2

No, I did not format the drive as FAT32.

E
Elephnt_Attack
Junior Member
49
02-12-2022, 02:33 PM
#3
I’m assuming you’re attempting a direct BIOS flash without using the flashback tool. After downloading the newest BIOS, did you completely extract the .ROM file and insert it straight onto the USB stick? Was the drive empty beforehand? To be cautious, I’d start with a fresh FAT32 format. Then insert the BIOS file directly onto the flash drive instead of the ZIP version. Retry if needed. If that doesn’t work, you may need to follow the detailed Flashback procedure carefully.
E
Elephnt_Attack
02-12-2022, 02:33 PM #3

I’m assuming you’re attempting a direct BIOS flash without using the flashback tool. After downloading the newest BIOS, did you completely extract the .ROM file and insert it straight onto the USB stick? Was the drive empty beforehand? To be cautious, I’d start with a fresh FAT32 format. Then insert the BIOS file directly onto the flash drive instead of the ZIP version. Retry if needed. If that doesn’t work, you may need to follow the detailed Flashback procedure carefully.

E
Ender_Craft47
Posting Freak
866
02-13-2022, 08:10 PM
#4
You should wait and see if the update completes normally. If it doesn’t show up on the BIOS screen, a forced restart might help.
E
Ender_Craft47
02-13-2022, 08:10 PM #4

You should wait and see if the update completes normally. If it doesn’t show up on the BIOS screen, a forced restart might help.

S
SnifePvP
Posting Freak
872
02-16-2022, 02:23 PM
#5
Run the startup program to access the BIOS settings.
S
SnifePvP
02-16-2022, 02:23 PM #5

Run the startup program to access the BIOS settings.

C
CrazyBessyCat
Posting Freak
912
02-20-2022, 06:46 PM
#6
Review the instructions in the PDF using the provided link. Follow each section carefully as outlined.
C
CrazyBessyCat
02-20-2022, 06:46 PM #6

Review the instructions in the PDF using the provided link. Follow each section carefully as outlined.

T
TheAlexZ_
Member
210
02-20-2022, 07:44 PM
#7
This is the flashback method which the OP isn't trying to use, however I did provide a detailed video guide to use that method if it comes to it.
T
TheAlexZ_
02-20-2022, 07:44 PM #7

This is the flashback method which the OP isn't trying to use, however I did provide a detailed video guide to use that method if it comes to it.