Check the CAT cable functionality
Check the CAT cable functionality
Ok guys I have a stupid question. Is there a way to test if a cat cable can take 10 gig. I live in a fairly new apartment and it is precabled all the cables run in the wall.... Now I have access to the termination points. The cables are marked as CAT 6 so in theory they should take 10gig.... The apartment is small so no run is longer than 15m. I tested the cables with a normal tester but that thing only tells if the cable works. How can i test if it actually runs 10gig? Any way without crazy expensive equipment?
You're facing a challenge with your limited hardware. You're weighing the pros and cons of upgrading to a 10GbN network router, especially since you're concerned about compatibility issues with existing cables that might be buried in concrete. It's important to research affordable options and find a reliable source for recommendations.
Also if those cables aren't 10G ready, there are alternative solutions. The idea of manually terminating the cable isn't practical—standard tools require specific equipment. You might need a proper termination device instead.
What connections should be made for 10g speeds? If you don’t have a NAS, it won’t matter much. Fluke conducts tests, but there are probably thousands of them. You can proceed as usual—it just uses cat 6/6a. I’ll try switching the ends first; if that fails, the problem is likely with the cable inside the walls.
I thought it would be wise to check the ends first. https://www.amazon.co.uk/SAC-Electronics...B00HACNMC4 To be clear, using a standard crimping tool would suffice. My main setup is also a NAS running a RAID array, so others can connect devices like streaming units and laptops. I don’t really need it, but it could be useful. That’s why I’m still unsure.
I can install terminal blocks instead of male RJ45 ends for easy cable swapping. The devices don’t require 10G links—your connection will run at standard speeds. Which switch are you using? Does it support 10G?
I'm evaluating a potential upgrade. It's worth considering if it's worth investing in 10 gigabits. They offer 1 gigabit, but multiple connections could boost performance. Streaming something might help too. My current connection is only 300 Mbps. If I link my main rig to the NAS and stream with two 1-gig devices or use WiFi6, I could easily exceed 1 gigabit. This seems like a long-term solution, though I'm sure a new router will be needed eventually.
I’m comparing two router options and trying to decide which fits my needs. I need many ports and the ability to run software for VPN and server use. I’m unsure if spending on a 10Gb port now is worth it, but I want something that’s future-proof without getting into complex setups or buying a rack. Since I don’t have much space, I’ll likely upgrade once 10Gb becomes more common.
Choose a switch featuring 10g ports. This avoids the router handling slower speeds. You’ll need enough ports to support your requirements. Likely, you’ll wait for 10g options to become more affordable and widely available, since the advantage for your setup is minimal.