F5F Stay Refreshed Hardware Desktop Check if your graphics card is functioning properly.

Check if your graphics card is functioning properly.

Check if your graphics card is functioning properly.

Pages (2): Previous 1 2
Z
ZakkW
Member
86
01-16-2022, 10:42 PM
#11
It sounds like you want to proceed with the plan and provide an update.
Z
ZakkW
01-16-2022, 10:42 PM #11

It sounds like you want to proceed with the plan and provide an update.

L
llamasking
Junior Member
36
01-16-2022, 10:42 PM
#12
Currently 1.5 hours have passed with both systems operating on CS:GO. The GPU is in another machine but still connected via PSU to my PC, which removes any power supply concerns. The other machine lacks sufficient wattage for the GPU, so that was necessary. On the main PC where crashes occurred, there is no GPU and it’s running CS directly through IGPU; performance remains poor but stable. Previously, this system experienced random frame drops to zero, causing sudden lag—usually during intense moments like looking at a corner. This issue doesn’t occur without the GPU, though it still runs at 30 FPS. I’m planning to keep both systems running for now and observe further, but for now it seems fine.
L
llamasking
01-16-2022, 10:42 PM #12

Currently 1.5 hours have passed with both systems operating on CS:GO. The GPU is in another machine but still connected via PSU to my PC, which removes any power supply concerns. The other machine lacks sufficient wattage for the GPU, so that was necessary. On the main PC where crashes occurred, there is no GPU and it’s running CS directly through IGPU; performance remains poor but stable. Previously, this system experienced random frame drops to zero, causing sudden lag—usually during intense moments like looking at a corner. This issue doesn’t occur without the GPU, though it still runs at 30 FPS. I’m planning to keep both systems running for now and observe further, but for now it seems fine.

T
timo_1892
Senior Member
715
01-16-2022, 10:42 PM
#13
We could have verified GPU-Z and observed the connection speed the card was using. I used a vertical mount for my 011D and understand if the card isn’t positioned correctly it will only operate at 4x PCIe. I don’t see any crashes, just minor stuttering in games. When rebuilding the main system with the 2070s, download GPU-Z and ensure the link speed reaches up to 16x
T
timo_1892
01-16-2022, 10:42 PM #13

We could have verified GPU-Z and observed the connection speed the card was using. I used a vertical mount for my 011D and understand if the card isn’t positioned correctly it will only operate at 4x PCIe. I don’t see any crashes, just minor stuttering in games. When rebuilding the main system with the 2070s, download GPU-Z and ensure the link speed reaches up to 16x

K
KriGen39
Member
53
01-16-2022, 10:42 PM
#14
I pressed the button to start a load test in gpu-z and attached the screenshot showing the message. Spoiler alert.
K
KriGen39
01-16-2022, 10:42 PM #14

I pressed the button to start a load test in gpu-z and attached the screenshot showing the message. Spoiler alert.

M
Magic_Wolf_
Senior Member
530
01-16-2022, 10:42 PM
#15
Is this connected to the primary PC? The PCIe port is operating at 1.1 instead of 3.0. Have you adjusted it in the BIOS? Check for a 'Link Speed' option and confirm it’s set to 3.0, not 1.1.
M
Magic_Wolf_
01-16-2022, 10:42 PM #15

Is this connected to the primary PC? The PCIe port is operating at 1.1 instead of 3.0. Have you adjusted it in the BIOS? Check for a 'Link Speed' option and confirm it’s set to 3.0, not 1.1.

P
PanddoX
Junior Member
4
01-16-2022, 10:42 PM
#16
Just like this? I haven’t touched the GPU or even the tower since the last photo. The only changes were launching CS:GO in a match with GPU-Z enabled and Task Manager open. Now it shows 3.0, which is confusing. Spoiler alert!
P
PanddoX
01-16-2022, 10:42 PM #16

Just like this? I haven’t touched the GPU or even the tower since the last photo. The only changes were launching CS:GO in a match with GPU-Z enabled and Task Manager open. Now it shows 3.0, which is confusing. Spoiler alert!

X
XxSh1ftedxX
Member
71
01-16-2022, 10:42 PM
#17
This might indicate you're using the maximum performance settings in NVIDIA. I assumed you were already putting it under strain when it displayed 1.1, but that doesn't seem to be the case.
X
XxSh1ftedxX
01-16-2022, 10:42 PM #17

This might indicate you're using the maximum performance settings in NVIDIA. I assumed you were already putting it under strain when it displayed 1.1, but that doesn't seem to be the case.

P
Pekaaa
Member
206
01-16-2022, 10:42 PM
#18
I started the gpuz pcie load. After clicking the next option next to the bus interface box, I opened CSGO and it worked differently. Still, I’m not sure what’s happening.
P
Pekaaa
01-16-2022, 10:42 PM #18

I started the gpuz pcie load. After clicking the next option next to the bus interface box, I opened CSGO and it worked differently. Still, I’m not sure what’s happening.

H
hahaha100
Member
172
01-16-2022, 10:42 PM
#19
I couldn't avoid a crash with the card on or off over a few hours. I restored it to my PC and experienced another crash within a couple of hours. I'm trying to put the old card back in and check if it causes issues, but I've started an RMA for the 2070s, hoping it's just the card problem, not the CPU.
H
hahaha100
01-16-2022, 10:42 PM #19

I couldn't avoid a crash with the card on or off over a few hours. I restored it to my PC and experienced another crash within a couple of hours. I'm trying to put the old card back in and check if it causes issues, but I've started an RMA for the 2070s, hoping it's just the card problem, not the CPU.

M
MrAzazazaza
Member
222
01-16-2022, 10:42 PM
#20
The situation is getting more complex. I haven't encountered a crash during a stress test yet. I completed FurMark for over five hours without any issues, as shown in the attached time log. The only change was reinstalling the card into my main PC after testing the previous one for a few hours. It didn’t fail. I expected a crash within that time frame, but it hasn’t happened. With multi-monitor off and PCIe set to PEG, I’m curious if I should try this again using an iGPU to check for crashes. I also ran CS:GO for about an hour without any problems recently.
M
MrAzazazaza
01-16-2022, 10:42 PM #20

The situation is getting more complex. I haven't encountered a crash during a stress test yet. I completed FurMark for over five hours without any issues, as shown in the attached time log. The only change was reinstalling the card into my main PC after testing the previous one for a few hours. It didn’t fail. I expected a crash within that time frame, but it hasn’t happened. With multi-monitor off and PCIe set to PEG, I’m curious if I should try this again using an iGPU to check for crashes. I also ran CS:GO for about an hour without any problems recently.

Pages (2): Previous 1 2