F5F Stay Refreshed Hardware Desktop Charging via USB-C on a motherboard isn't typically fast compared to standard USB ports.

Charging via USB-C on a motherboard isn't typically fast compared to standard USB ports.

Charging via USB-C on a motherboard isn't typically fast compared to standard USB ports.

Pages (2): 1 2 Next
S
sniperboy650
Senior Member
735
09-17-2018, 06:16 AM
#1
It seems my USB-C port on the ROG Strix Z390 gaming motherboard isn't delivering fast charging speeds for my phones. I've used a Galaxy Fold and a Note 20+ Ultra, but neither worked. I checked the wattage specifications online, though I'm not sure what my board supports. I also tried two USB-C cables, but nothing changed.
S
sniperboy650
09-17-2018, 06:16 AM #1

It seems my USB-C port on the ROG Strix Z390 gaming motherboard isn't delivering fast charging speeds for my phones. I've used a Galaxy Fold and a Note 20+ Ultra, but neither worked. I checked the wattage specifications online, though I'm not sure what my board supports. I also tried two USB-C cables, but nothing changed.

B
BurgundyRose
Junior Member
6
09-17-2018, 09:35 PM
#2
It seems like you're expressing a feeling of helplessness. Let me know how I can assist you further.
B
BurgundyRose
09-17-2018, 09:35 PM #2

It seems like you're expressing a feeling of helplessness. Let me know how I can assist you further.

L
LorrenK
Senior Member
703
09-25-2018, 12:39 AM
#3
L
LorrenK
09-25-2018, 12:39 AM #3

T
Tzabcan
Junior Member
39
09-25-2018, 01:28 AM
#4
Usually PC USB connections deliver minimal power, needing about 2.1A for quick charging. Most motherboards provide only 0.5 to 1A at best. The same applies to Type C ports—they’re not inherently fast-charging, just a standard connector type.
T
Tzabcan
09-25-2018, 01:28 AM #4

Usually PC USB connections deliver minimal power, needing about 2.1A for quick charging. Most motherboards provide only 0.5 to 1A at best. The same applies to Type C ports—they’re not inherently fast-charging, just a standard connector type.

V
Viridian
Member
168
10-01-2018, 10:53 AM
#5
Motherboard makers seldom share details about USB port capabilities, typically around 10 watts—enough for devices like keyboards, mice, drives, and controllers. This information was last updated on August 27, 2021 by Freakwise.
V
Viridian
10-01-2018, 10:53 AM #5

Motherboard makers seldom share details about USB port capabilities, typically around 10 watts—enough for devices like keyboards, mice, drives, and controllers. This information was last updated on August 27, 2021 by Freakwise.

B
Bifes_PT
Member
205
10-02-2018, 03:30 AM
#6
Usually it's even lower, between 2.5 and 5 watts, because they need to stay within the 5V USB standard; you'll find it tough to locate anything exceeding 5W, though I've seen a few reaching 7.5W.
B
Bifes_PT
10-02-2018, 03:30 AM #6

Usually it's even lower, between 2.5 and 5 watts, because they need to stay within the 5V USB standard; you'll find it tough to locate anything exceeding 5W, though I've seen a few reaching 7.5W.

D
DemonPyro
Junior Member
32
10-03-2018, 11:20 PM
#7
They were meant to be included for charging phones, especially with their presence on monitors now.
D
DemonPyro
10-03-2018, 11:20 PM #7

They were meant to be included for charging phones, especially with their presence on monitors now.

C
ClashOG
Junior Member
14
10-05-2018, 02:22 PM
#8
The typical setup is 5 volts with 0.9 amps for USB 2.0, or 5 volts with 0.5 amps for USB 3.0. They likely increased these limits for newer USB standards. Most motherboard makers include a 2-amp fuse or a slightly stronger one for two ports, allowing a device to draw up to 2 amps if necessary. For quick charging, the phone’s charging system must talk to the host device and tell it its capabilities—like supporting 5 volts at 1A, 5 volts at 2A, 9 volts at 2A, or 12 volts at 1.67A—but on a board there’s no way to communicate with the phone or adjust voltage unless it has a dedicated charging port. Consequently, your phone usually sticks to the standard 5v x 0.9A or less.
C
ClashOG
10-05-2018, 02:22 PM #8

The typical setup is 5 volts with 0.9 amps for USB 2.0, or 5 volts with 0.5 amps for USB 3.0. They likely increased these limits for newer USB standards. Most motherboard makers include a 2-amp fuse or a slightly stronger one for two ports, allowing a device to draw up to 2 amps if necessary. For quick charging, the phone’s charging system must talk to the host device and tell it its capabilities—like supporting 5 volts at 1A, 5 volts at 2A, 9 volts at 2A, or 12 volts at 1.67A—but on a board there’s no way to communicate with the phone or adjust voltage unless it has a dedicated charging port. Consequently, your phone usually sticks to the standard 5v x 0.9A or less.

T
ToddThaGod
Junior Member
46
10-05-2018, 02:46 PM
#9
If the display or the machine uses USB PD (USB Power Delivery) and your device can use it, then the phone might connect to the screen or machine to increase voltage or flow so it could charge more quickly. They also have the option to use QuickCharge on certain ports if desired. However, by default, monitors and computers usually lack this ability to adjust voltage and deliver large currents for fast charging. I notice USB ports on screens exist mainly for ease—like plugging in a keyboard or mouse without needing a long cable behind the PC case, or for quickly connecting an external hard drive. SOME screens can be powered via USB Type-C, providing more than 10-20 watts compared to regular USB, though typical laptop USB-C ports that handle extra power are often more advanced, possibly using Thunderbolt or special power delivery features.
T
ToddThaGod
10-05-2018, 02:46 PM #9

If the display or the machine uses USB PD (USB Power Delivery) and your device can use it, then the phone might connect to the screen or machine to increase voltage or flow so it could charge more quickly. They also have the option to use QuickCharge on certain ports if desired. However, by default, monitors and computers usually lack this ability to adjust voltage and deliver large currents for fast charging. I notice USB ports on screens exist mainly for ease—like plugging in a keyboard or mouse without needing a long cable behind the PC case, or for quickly connecting an external hard drive. SOME screens can be powered via USB Type-C, providing more than 10-20 watts compared to regular USB, though typical laptop USB-C ports that handle extra power are often more advanced, possibly using Thunderbolt or special power delivery features.

L
LittleBill08
Member
190
10-05-2018, 05:40 PM
#10
USB-C is merely a type of connector. My USB-C device operates at USB 2.0, which means it doesn’t utilize maximum speed or capacity. The shape itself is what defines it.
L
LittleBill08
10-05-2018, 05:40 PM #10

USB-C is merely a type of connector. My USB-C device operates at USB 2.0, which means it doesn’t utilize maximum speed or capacity. The shape itself is what defines it.

Pages (2): 1 2 Next