Charging for 1Gbps while delivering only 400Mbps
Charging for 1Gbps while delivering only 400Mbps
I'm trying to connect my Ethernet cable through a TPLink Network Extender because my home doesn't have any Ethernet ports. I'm subscribed to Gigabit Internet from Telus and use their Telus Wifi-Hub modem. The extender I received is the RE550, which supports Gigabit speeds. I checked that the Ethernet cable isn't being capped and it's actually delivering 1000Mbps, so everything seems fine with the cable. Could it be the extender itself limiting the speed to 600Mbps? Please advise how to resolve this. Thanks.
These devices are recognized for reducing data speed and affecting signal strength. Wi-Fi extenders lower performance, while powerline adapters face issues from environmental factors.
Are you connecting to the Gigabit port for your primary router, or is it supporting only Ethernet devices? If your main router and extender rely on WiFi, performance drops significantly because the repeater must handle all traffic. (This highlights why extenders are best avoided unless necessary. If used, always opt for a wired connection whenever feasible.) When you link into your main router via a network cable, what speeds are achievable? This indicates devices have established a Gigabit connection, but it doesn't guarantee every segment of the path to the internet is equally fast.
The Network Extender serves only to offer a port for my PC because I lack a wireless adapter. I haven’t connected it to the router yet as it’s in a difficult spot, and my Ethernet cable is very short.
It might help if an Ethernet extender works for your setup. Otherwise, the problem could be more persistent.
It sounds like you're asking about an Ethernet extender using a cable. Yes, a cable can resolve the issue, and it allows data to travel efficiently in both directions.
You can install a Cat6 cable extending up to 320 feet for Gigabit performance between devices.