Changing GPU issues :(
Changing GPU issues :(
Hi, I recently switched from a GTX 1050 Ti to a RTX 3060 Ti. I’m facing some performance issues, possibly due to a bottleneck. At first, it was my RAM—only 8GB of DDR4—but after upgrading to 16GB, the problem persists. Games like Minecraft, GTA Online, and Warzone show noticeable FPS drops. I suspect the issue might be with the motherboard or power supply unit. I’m not very familiar with PC specs, but I have an iBuyPower prebuild that I just upgraded. Here are the details:
- CPU: Intel i5-11400F
- GPU: GTX 1050 Ti → RTX 3060 Ti
- RAM: 8GB DDR4 → 16GB DDR4
- PSU: Not listed on the site (MOBO: B560 DS3H AC-Y1 SSD)
- SSD: Two 500GB drives before one was missing after upgrades
- Previous PC link: https://www.bestbuy.com/site/ibuypower-t...Id=6458322
I refer to a situation where something remains noticeable or hindered despite efforts to improve it. To figure this out, I analyze patterns and data to see if progress is actually happening or if obstacles persist.
In Minecraft, I often experience stutters and frame drops at lower settings, but performance remains stable at higher settings. In GTA, switching from low to high graphics doesn’t affect the frame rate. Hope this clarifies things.
Sorry, I wasn't aware of that. I attempted to proceed after installing the GPU and updating the driver, following the prompts. I also tried uninstalling and reinstalling the driver manually. However, I'm curious if this was necessary since it's a NVIDIA to NVIDIA update.
I gathered a lot of details for you. The computer you have comes with various specifications. Their power supplies range from 400 to 700 watts. Your original machine had a 65 watt CPU and a 75 watt graphics card, so I suspect the low-wattage PSU might be an issue. You should be worried about that. Additionally, the PSUs they use are generally of poor quality. You might want to watch some tutorials by David Doe on tech topics. He accurately points out the common mistakes in prebuilt setups, like cutting corners to save money. This includes low-wattage PSUs, a single stick of RAM, inadequate CPU coolers, and cheap M.ATX motherboards. Take a look inside the tower. Check the side panel for the PSU specs—know its wattage and brand. It’s crucial. By the way, the 3060 Ti has a 200 watt TDP card. I’m using one myself. It needs a 600 watt PSU, though it works fine on a solid 500 watt unit. If your PSU isn’t sufficient, it can lead to performance problems. Also, keep in mind that the new RAM you purchased—did you enable XMP settings?—could be the reason. It’s listed in the BIOS. The issue might actually be with your RAM running at default speeds. But I strongly emphasize finding out about your power supply.
Great! You're very appreciated. I'll get back to you quickly with the PSU details. I'm also going to try enabling XMP for RAM. Thank you so much!
Your current setup seems fine for casual gaming and everyday tasks, but always check for updates and stability before extended use.