F5F Stay Refreshed Power Users Networks Change your connection from wireless to Ethernet.

Change your connection from wireless to Ethernet.

Change your connection from wireless to Ethernet.

B
BjornIronMan
Junior Member
Find
48
01-27-2023, 05:39 PM
#1
The main topic is setting up a cable for my PC. I have a few points to confirm: should the cable be about 20 meters long? Are there specific types I should avoid? What’s an affordable price range? Should I use Cat 5e or Cat 6? Can the cable connect directly to the router’s back ports, or do I need a wall port installed? I’m completely new to this, so please understand I’m asking very basic questions. Thanks.
Reply
Reply
B
BjornIronMan
01-27-2023, 05:39 PM #1

The main topic is setting up a cable for my PC. I have a few points to confirm: should the cable be about 20 meters long? Are there specific types I should avoid? What’s an affordable price range? Should I use Cat 5e or Cat 6? Can the cable connect directly to the router’s back ports, or do I need a wall port installed? I’m completely new to this, so please understand I’m asking very basic questions. Thanks.

Reply
Reply
M
mine123lord
Junior Member
Find
8
01-27-2023, 06:52 PM
#2
Cat5e works well for 1gbps (up to 2.5gbps if both ends support the latest standard) over distances of up to 100 meters. Cat6 offers speeds of 10gbps up to about 50 meters. Cat6a provides similar performance up to 100 meters. The difference between these cables is likely minimal, so you’ll probably find pre-made Cat6 or Cat6a cables in stores. These are widely available and you can easily connect your router and computer without dealing with installation issues. Avoid the cheapest options; opt for a reputable brand in networking if you can. It should be sufficient to purchase a 20+ meter patch cable with pre-installed connectors and plug it into your router and PC.
Reply
Reply
M
mine123lord
01-27-2023, 06:52 PM #2

Cat5e works well for 1gbps (up to 2.5gbps if both ends support the latest standard) over distances of up to 100 meters. Cat6 offers speeds of 10gbps up to about 50 meters. Cat6a provides similar performance up to 100 meters. The difference between these cables is likely minimal, so you’ll probably find pre-made Cat6 or Cat6a cables in stores. These are widely available and you can easily connect your router and computer without dealing with installation issues. Avoid the cheapest options; opt for a reputable brand in networking if you can. It should be sufficient to purchase a 20+ meter patch cable with pre-installed connectors and plug it into your router and PC.

Reply
Reply
P
panda1234
Junior Member
Find
14
01-29-2023, 07:12 PM
#3
Powerline offers a promising option, but there are potential drawbacks to consider. For your setup with a 100mbps connection and a Netgear pl1000, it might work well but could have limitations.
Reply
Reply
P
panda1234
01-29-2023, 07:12 PM #3

Powerline offers a promising option, but there are potential drawbacks to consider. For your setup with a 100mbps connection and a Netgear pl1000, it might work well but could have limitations.

Reply
Reply
T
TonyParker04
Junior Member
Find
4
01-30-2023, 01:44 AM
#4
This pertains to a laptop or desktop setup. For greater reach, consider using Wi-Fi when possible, or Ethernet via powerline. It helps reduce cable tangling and enhances durability of your setup. Based on my observations, for extended distances secure cables along building edges with tape—cable path tape can improve appearance and longevity. Room-to-room Ethernet becomes challenging in areas with frequent door openings; flat wire cables work well, and routing them near hinges with insulating foam can protect against damage. Avoid powerline Ethernet if the building’s wiring is outdated or prone to interference, especially in older structures. Wi-Fi often performs better in such environments, particularly with heavy interference. I’ll include a recommended powerline Ethernet product on Amazon in this post for reference: https://www.amazon.com/TP-Link-AV600-Pow...5610&psc=1
Reply
Reply
T
TonyParker04
01-30-2023, 01:44 AM #4

This pertains to a laptop or desktop setup. For greater reach, consider using Wi-Fi when possible, or Ethernet via powerline. It helps reduce cable tangling and enhances durability of your setup. Based on my observations, for extended distances secure cables along building edges with tape—cable path tape can improve appearance and longevity. Room-to-room Ethernet becomes challenging in areas with frequent door openings; flat wire cables work well, and routing them near hinges with insulating foam can protect against damage. Avoid powerline Ethernet if the building’s wiring is outdated or prone to interference, especially in older structures. Wi-Fi often performs better in such environments, particularly with heavy interference. I’ll include a recommended powerline Ethernet product on Amazon in this post for reference: https://www.amazon.com/TP-Link-AV600-Pow...5610&psc=1

Reply
Reply
C
Cake_Wake
Junior Member
Find
10
01-30-2023, 08:53 AM
#5
It's a standard setup, but the wiring is quite old—about 24 to 25 years. With one extra computer, a TV, and several chargers plugged in, there could be significant interference.
Reply
Reply
C
Cake_Wake
01-30-2023, 08:53 AM #5

It's a standard setup, but the wiring is quite old—about 24 to 25 years. With one extra computer, a TV, and several chargers plugged in, there could be significant interference.

Reply
Reply