F5F Stay Refreshed Hardware Desktop Capacitor or resistor missing from the motherboard!

Capacitor or resistor missing from the motherboard!

Capacitor or resistor missing from the motherboard!

Pages (2): 1 2 Next
_
__Jenna_453__
Member
57
03-21-2016, 10:14 PM
#1
Hello everyone. My old motherboard is an MSI Z68A-G45 G3. While cleaning, I accidentally removed a component, but it still functions properly. Is this a concern for others using this board? If so, please capture a clear high-resolution image of the affected area. Thanks!
_
__Jenna_453__
03-21-2016, 10:14 PM #1

Hello everyone. My old motherboard is an MSI Z68A-G45 G3. While cleaning, I accidentally removed a component, but it still functions properly. Is this a concern for others using this board? If so, please capture a clear high-resolution image of the affected area. Thanks!

P
petegaming123
Member
127
03-22-2016, 04:37 PM
#2
Activate it and observe the outcome. We can't confirm success until you attempt to boot it. If it starts up smoothly, nothing needs to be said—if not, consider removing the CPU and cleaning the socket with 99% isopropyl alcohol, covering it for 24 hours; this method has helped save my board several times.
P
petegaming123
03-22-2016, 04:37 PM #2

Activate it and observe the outcome. We can't confirm success until you attempt to boot it. If it starts up smoothly, nothing needs to be said—if not, consider removing the CPU and cleaning the socket with 99% isopropyl alcohol, covering it for 24 hours; this method has helped save my board several times.

X
XxKripxDeMoNxX
Senior Member
536
03-24-2016, 01:54 PM
#3
It functions properly. I’m checking if anything is missing. Since you don’t have a reference board, you might need to solder it yourself.
X
XxKripxDeMoNxX
03-24-2016, 01:54 PM #3

It functions properly. I’m checking if anything is missing. Since you don’t have a reference board, you might need to solder it yourself.

M
Martienez123
Member
52
03-25-2016, 08:06 AM
#4
I accidentally dropped my screwdriver while taking out my graphics card. It slipped and the tip came off, cutting two resistors. It’s still functioning well after many years. I’ve never experienced any problems before.
M
Martienez123
03-25-2016, 08:06 AM #4

I accidentally dropped my screwdriver while taking out my graphics card. It slipped and the tip came off, cutting two resistors. It’s still functioning well after many years. I’ve never experienced any problems before.

M
MONSTERmoose91
Senior Member
526
03-25-2016, 04:34 PM
#5
It appears to be integrated into the audio interface of the motherboard. I should verify all inputs and outputs for proper operation. You may encounter a malfunctioning channel or an issue there. However, the motherboard could still function. There might be alternatives if the built-in audio isn't working. Without knowing the chip details, identifying the exact problem is challenging. It's possible it's just a headphone preamp, though it could also be a DAC—Digital to Analogue Converter.
M
MONSTERmoose91
03-25-2016, 04:34 PM #5

It appears to be integrated into the audio interface of the motherboard. I should verify all inputs and outputs for proper operation. You may encounter a malfunctioning channel or an issue there. However, the motherboard could still function. There might be alternatives if the built-in audio isn't working. Without knowing the chip details, identifying the exact problem is challenging. It's possible it's just a headphone preamp, though it could also be a DAC—Digital to Analogue Converter.

F
Fireking124
Senior Member
576
04-08-2016, 02:45 AM
#6
This feels like an unusual suggestion, it doesn't seem applicable.
F
Fireking124
04-08-2016, 02:45 AM #6

This feels like an unusual suggestion, it doesn't seem applicable.

M
MrKryp
Senior Member
643
04-08-2016, 02:54 AM
#7
It seems the initial message had limited details.
M
MrKryp
04-08-2016, 02:54 AM #7

It seems the initial message had limited details.

G
gogofrgl1234
Senior Member
718
04-13-2016, 05:17 AM
#8
If your board is completely dead and you've already tried everything, that's essentially your next step. Because I occasionally buy damaged boards, it's usually the first option I consider.
G
gogofrgl1234
04-13-2016, 05:17 AM #8

If your board is completely dead and you've already tried everything, that's essentially your next step. Because I occasionally buy damaged boards, it's usually the first option I consider.

_
_STEVIE__
Junior Member
20
04-13-2016, 05:37 AM
#9
It travels from pin #4 on the chip to the capacitor or resistor and then to the back of the board, yet it stops abruptly without continuing further.
_
_STEVIE__
04-13-2016, 05:37 AM #9

It travels from pin #4 on the chip to the capacitor or resistor and then to the back of the board, yet it stops abruptly without continuing further.

T
Tsaritsa
Member
59
04-13-2016, 12:06 PM
#10
Simple solution, just soldered another piece in place – done. As long as the part matches what was removed, it should function again. I’ve taken components from dead boards, cards, etc., to repair issues like this before. If it fits perfectly where it used to, you should be able to fix it and it’ll work once more.
T
Tsaritsa
04-13-2016, 12:06 PM #10

Simple solution, just soldered another piece in place – done. As long as the part matches what was removed, it should function again. I’ve taken components from dead boards, cards, etc., to repair issues like this before. If it fits perfectly where it used to, you should be able to fix it and it’ll work once more.

Pages (2): 1 2 Next