Can't Oc my CPU
Can't Oc my CPU
Sorry for the delayed response, I was quite occupied.
These are PSU's and the last one is SetFSB with i OC my CPU by inserting the PLL code from my motherboard and modifying the FSB as 216/380. I increased it to 240/380 which means 2.6ghz and 284/380 means 3.0ghz. I only used this for a short time and it worked fine... But now that I switched the PSU, the system keeps crashing.
Regarding the role of OC in damaging the PSU isn't significant—maybe around 1%—since when it was raining outside, I removed the case to clean dust (it was clean), but the next day I tried to turn it on and it exploded, emitting a strong onion smell. After replacing the PSU, it still wouldn’t boot properly; the memory was likely clogged with moisture. Cleaning the RAM fixed the issue.
But the main point isn't about this. The problem seems to be that the system won’t let me OC above 2.6ghz. It could be due to the PSU itself.
https://imgur.com/a/4lDzrc0
View: https://imgur.com/a/4lDzrc0
If you can read the voltage readings or other details on the PSU, let me know if there’s anything different. Which one is better and which is more suitable for high frequencies?
I think the crash might be caused by the PSU or possibly because I haven’t replaced the thermal paste after a long time, or maybe there’s an issue with the memory.
Anyway, I don’t have much clarity and would really appreciate your help.
Thanks!
The updated psu seems to hold more power than the previous model. Therefore, it likely isn't the problem if everything is functioning properly.
You're welcome!
Updated my RAM modules resolved the issue, allowing me to reach 3.0ghz.
)
Appreciate it!